EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Equation of state measurements of additively manufactured tantalum up to 437 GPa

M. G. Gorman, M. Jones, S. Keaveney, J. S. Read, B. Dias, K. Osborn, J. Shadbolt, P. Jarvis, S. Foster, B. Naab, M. Osborne, G. C. Burdiak und 3 weitere

Journal of Applied Physics · 07.06.2025 · 137 (21)

DOI: 10.1063/5.0264514 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 03.06.2025. Verfasst von M. G. Gorman und 14 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Symmetric impact experiments of additively manufactured tantalum (AM Ta) were performed on a two-stage light-gas gun at projectile velocities up to 6.7 km/s. The projectile velocity and shock transit time through the Ta sample were both measured using Photon Doppler Velocimetry (PDV), which enabled absolute measurements of the AM Ta shock equation of state. Our results showed that the shock response of the AM Ta samples agreed, within experimental uncertainties, with the previous measurements of the wrought Ta samples at pressures between 125 and 437 GPa. These results are promising for using additively manufactured components for inertial fusion energy and high-pressure materials science applications and demonstrate that the high-pressure behavior of AM Ta can be modeled using the existing equations of state for tantalum.

Zitieren

APA

Gorman, M. G., Jones, M., Keaveney, S., Read, J. S., Dias, B., Osborn, K., Shadbolt, J., Jarvis, P., Foster, S., Naab, B., Osborne, M., Burdiak, G. C., Ringrose, T., Skidmore, J. W., & Doyle, H. W. (2025). Equation of state measurements of additively manufactured tantalum up to 437 GPa. Journal of Applied Physics, 137(21). https://doi.org/10.1063/5.0264514

Vancouver

Gorman MG, Jones M, Keaveney S, Read JS, Dias B, Osborn K, et al. Equation of state measurements of additively manufactured tantalum up to 437 GPa. Journal of Applied Physics. 2025;137(21). doi:10.1063/5.0264514

BibTeX
@article{Gorman2025,
  author = {Gorman, M. G. and Jones, M. and Keaveney, S. and Read, J. S. and Dias, B. and Osborn, K. and Shadbolt, J. and Jarvis, P. and Foster, S. and Naab, B. and Osborne, M. and Burdiak, G. C. and Ringrose, T. and Skidmore, J. W. and Doyle, H. W.},
  title = {Equation of state measurements of additively manufactured tantalum up to 437 GPa},
  journal = {Journal of Applied Physics},
  year = {2025},
  volume = {137},
  number = {21},
  doi = {10.1063/5.0264514}
}
Kostenlos starten →