Interface-reinforced high-capacity fiber cathode for wearable Li–S batteries
National Science Review · 18.09.2024 · 11 (10)
DOI: 10.1093/nsr/nwae262 ↗Kurz gefasst
Fachartikel in der Zeitschrift National Science Review, online erschienen am 30.07.2024. Verfasst von Lei Huang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798, Singapore. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Singapore Ministry of Education Academic Research Fund Tier 2, Singapore Ministry of Education Academic Research Fund Tier 1, National Natural Science Foundation of China.
Abstract (Originalsprache)
Fiber-shaped Li–S batteries are attractive for constructing smart textiles as flexible power solutions due to their high theoretical specific capacity, flexibility and wearability. However, severe interfacial issues, such as the shuttle effect of polysulfides on the cathode side, lead to capacity decay and poor lifespan of the batteries. Herein, we report a fiber-shaped composite cathode with collaborative interface interactions to maintain electrode integrity and boost electrochemical performance. In this architecture, nanosulfur-polyvinylpyrrolidone (nanoS-PVP) particles are uniformly implanted into the few-layer Ti3C2Tx with outstanding electrical conductivity and then coated on aluminum (Al) fiber current collectors. Impressively, nanoS and soluble polysulfides are restricted to the cathode side via synergy physical confinement and chemical adsorption of Ti3C2Tx. The PVP chains on the surface of the nanoS prevent the sulfur from agglomeration and bridge the Ti3C2Tx by abundant hydrogen bonds. The enhanced interface endows the cathode with excellent mechanical flexibility, good adsorption of polysulfides and fast reaction kinetics. Consequently, the prepared Ti3C2Tx/nanoS-PVP@Al cathode exhibits excellent cycling performance (capacity retention of 92.8% after 1000 cycles at 1 C), high-rate capacity (556.2 mAh g−1 at 2.0 C) and high linear capacity (22.9 mAh m−1). Additionally, the fiber-shaped Li–S battery works effectively under deformation and high/low-temperature conditions. It can be integrated into the fabric to power light emitting diodes or charge a smartphone wirelessly.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798, Singapore.
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore.
- Department of Physics, City University of Hong Kong, Hong Kong 999077, China.
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
ORCID-Profile: Lei Wei
Förderung
- Singapore Ministry of Education Academic Research Fund Tier 2
- Singapore Ministry of Education Academic Research Fund Tier 1
- National Natural Science Foundation of China
- A*STAR
- Institute for Digital Molecular Analytics and Science
- NTU-PSL Joint Lab collaboration
Zitieren
APA
Huang, L., Zhou, T., Zhu, S., Yang, T., Zhou, X., He, B., Wang, S., Yan, W., & Wei, L. (2024). Interface-reinforced high-capacity fiber cathode for wearable Li–S batteries. National Science Review, 11(10). https://doi.org/10.1093/nsr/nwae262
Vancouver
Huang L, Zhou T, Zhu S, Yang T, Zhou X, He B, et al. Interface-reinforced high-capacity fiber cathode for wearable Li–S batteries. National Science Review. 2024;11(10). doi:10.1093/nsr/nwae262
BibTeX
@article{Huang2024,
author = {Huang, Lei and Zhou, Tianzhu and Zhu, Siyu and Yang, Tianqi and Zhou, Xuhui and He, Bing and Wang, Shuai and Yan, Wei and Wei, Lei},
title = {Interface-reinforced high-capacity fiber cathode for wearable Li–S batteries},
journal = {National Science Review},
year = {2024},
volume = {11},
number = {10},
doi = {10.1093/nsr/nwae262}
}
EUVIMED