Synergistic Cathode‐Electrolyte Engineering for Enhanced Longevity in Li‐S Batteries
Advanced Materials · 2025-09 · 37 (37)
DOI: 10.1002/adma.202505196 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 25.06.2025. Verfasst von Zhenfeng Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Alberta, Edmonton, AB, T6G 1H9, Canada. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, (NSERC) through the Discovery Grant Program, First Research Excellence Fund as part of the University of Alberta's Future Energy Systems research initiative.
Abstract (Originalsprache)
Due to the notorious shuttle effect and the uneven deposition of lithium ions under high current conditions, lithium‐sulfur batteries with ultra‐high sulfur loading struggle to achieve stable long‐cycle performance. Herein, a novel MBene‐based composite material is prepared using the ultrasonic freeze etching method as a cathode host. The shuttle effect is effectively inhibited, thanks to its unique structure and abundant active sites. Moreover, a small amount of Na 2 SeO 3 is introduced into the electrolyte to further enhance the long‐cycle performance. Due to the “reverse tip effect,” where sodium ions preferentially deposit over lithium ions, the growth of lithium dendrites is effectively suppressed. Remarkably, the cell with the novel cathode and electrolyte design exhibits an initial capacity of 778.2 mAh g −1 and sustains stability for up to 850 cycles with a capacity retention rate of 93.6% and a sulfur loading of 10.62 mg cm −2 . The synergistic strategy of optimizing both cathode and electrolyte systems effectively mitigates the shuttle effect and suppresses lithium dendrite growth, offering an innovative approach to designing ultra‐high‐sulfur‐loading lithium‐sulfur batteries with extended lifespans.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, University of Alberta, Edmonton, AB, T6G 1H9, Canada.
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB, T6G 1H9, Canada.
ORCID-Profile: Ge Li
Förderung
- Natural Sciences and Engineering Research Council of Canada
- (NSERC) through the Discovery Grant Program
- First Research Excellence Fund as part of the University of Alberta's Future Energy Systems research initiative
Zitieren
APA
Li, Z., Li, Y., Fei, Y., Li, P., Hung, S. Y., Zhang, H., & Li, G. (2025). Synergistic Cathode‐Electrolyte Engineering for Enhanced Longevity in Li‐S Batteries. Advanced Materials, 37(37). https://doi.org/10.1002/adma.202505196
Vancouver
Li Z, Li Y, Fei Y, Li P, Hung SY, Zhang H, et al. Synergistic Cathode‐Electrolyte Engineering for Enhanced Longevity in Li‐S Batteries. Advanced Materials. 2025;37(37). doi:10.1002/adma.202505196
BibTeX
@article{Li2025,
author = {Li, Zhenfeng and Li, Yue and Fei, Yue and Li, Pengcheng and Hung, Shin-Yu and Zhang, Hao and Li, Ge},
title = {Synergistic Cathode‐Electrolyte Engineering for Enhanced Longevity in Li‐S Batteries},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {37},
doi = {10.1002/adma.202505196}
}
EUVIMED