Deterministic τ-based clustering and mould optimization for reusable formwork in curved glulam construction
Journal of Computational Design and Engineering · 04.06.2026 · 13 (6) · 1-29
DOI: 10.1093/jcde/qwag042 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Computational Design and Engineering, online erschienen am 28.04.2026. Verfasst von Kristof Crolla und 5 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Grants Council (Hong Kong)’s General Research Fund, Innovating Timber Roofs: Algorithmic Expansion of Light-Weight Glulam Solutions for Low-Tech Construction Contexts, University of Hong Kong Department of Architecture Special Projects.
Abstract (Originalsprache)
This paper presents a deterministic computational workflow for the rationalization of curved glue-laminated beam assemblies through tolerance-based clustering and mold optimization. The method computes equilibrium catenary geometries, evaluates directed Hausdorff deviation, groups beams under a user-defined tolerance threshold, and optimizes shared mold families to reduce formwork requirements. It outputs the number of input curves, the cluster count, the maximum deviation per family, and a tolerance–cluster relationship that supports early-stage design-to-fabrication decision-making. Applied to a curved glulam roof case study, the workflow shows how tolerance governs mold reduction, with three- and eight-cluster scenarios demonstrating the trade-off between geometric fidelity and fabrication complexity, while keeping deviations below 1%. A full-scale prototype fabricated from a single optimized jig further demonstrates practical feasibility and controlled as-built accuracy in a low-resource fabrication setting.
Förderung
- Research Grants Council (Hong Kong)’s General Research Fund
- Innovating Timber Roofs: Algorithmic Expansion of Light-Weight Glulam Solutions for Low-Tech Construction Contexts
- University of Hong Kong Department of Architecture Special Projects
Zitieren
APA
Crolla, K., Jiang, Y., Hsu, P., Hou, J., Wong, N. L. H., & Cheng, Y. (2026). Deterministic τ-based clustering and mould optimization for reusable formwork in curved glulam construction. Journal of Computational Design and Engineering, 13(6), 1-29. https://doi.org/10.1093/jcde/qwag042
Vancouver
Crolla K, Jiang Y, Hsu P, Hou J, Wong NLH, Cheng Y. Deterministic τ-based clustering and mould optimization for reusable formwork in curved glulam construction. Journal of Computational Design and Engineering. 2026;13(6):1-29. doi:10.1093/jcde/qwag042
BibTeX
@article{Crolla2026,
author = {Crolla, Kristof and Jiang, Yilun and Hsu, Pei-Hsien and Hou, June-Hao and Wong, Nichol Long Hin and Cheng, Yu-Tung},
title = {Deterministic τ-based clustering and mould optimization for reusable formwork in curved glulam construction},
journal = {Journal of Computational Design and Engineering},
year = {2026},
volume = {13},
number = {6},
pages = {1--29},
doi = {10.1093/jcde/qwag042}
}
EUVIMED