Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
Materials · 31.12.2025 · 19 (1) · 145
DOI: 10.3390/ma19010145 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.12.2025. Verfasst von Binrong Zhu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Provincial College Key Laboratory of Intelligent Bridge Construction and Safe Operation & Maintenance, College of Civil Engineering, Nanjing …. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Foundation of Key Laboratory of Concrete and Pre-stressed Concrete Structures of Ministry of Education, Carbon Peak and Carbon Neutral Technology Innovation Funding of Jiangsu Province.
Abstract (Originalsprache)
3D concrete printing (3DCP) is an emerging intelligent construction technology that enables the direct transformation of digital models into physical components, thereby facilitating the precise fabrication of complex geometries. This study investigates the anisotropic mechanical properties and construction applicability of low-carbon 3D printed concrete for reusable formwork systems. Axial compression, flexural, and splitting tensile tests were conducted to examine mechanical anisotropy, and the effects of steel slag and iron tailings replacement levels on mechanical performance were evaluated. Carbon emission analysis was also performed. Using the coefficient-of-variation TOPSIS method, an optimal printable low-carbon mixture was identified, comprising 30% steel slag, 40% iron tailings sand, and 0.3% fibre content, balancing both mechanical performance and environmental benefits. To address the challenges associated with printing large monolithic formwork units, such as excessive weight and demoulding difficulties, three connection strategies for curved wall modular reusable formwork were designed. Finite element analyses were conducted to assess the strength and stiffness of each strategy, and an optimized connection configuration was proposed. The findings demonstrate the feasibility of accurately fabricating complex architectural components using low-carbon 3D printed concrete, providing theoretical and practical support for the industrialized production of large-scale, geometrically complex structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Jiangsu Provincial College Key Laboratory of Intelligent Bridge Construction and Safe Operation & Maintenance, College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China.
- School of Civil Engineering, Southeast University, Nanjing 211189, China.
- School of Civil and Architectural Engineering, Guizhou University of Engineering Science, Bijie 551700, China.
ORCID-Profile: Binrong Zhu, Jinlong Pan
Förderung
- National Natural Science Foundation of China
- Open Foundation of Key Laboratory of Concrete and Pre-stressed Concrete Structures of Ministry of Education
- Carbon Peak and Carbon Neutral Technology Innovation Funding of Jiangsu Province
Zitieren
APA
Zhu, B., Qi, M., Chen, W., & Pan, J. (2025). Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction. Materials, 19(1), 145. https://doi.org/10.3390/ma19010145
Vancouver
Zhu B, Qi M, Chen W, Pan J. Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction. Materials. 2025;19(1):145. doi:10.3390/ma19010145
BibTeX
@article{Zhu2025,
author = {Zhu, Binrong and Qi, Miao and Chen, Wei and Pan, Jinlong},
title = {Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction},
journal = {Materials},
year = {2025},
volume = {19},
number = {1},
pages = {145},
doi = {10.3390/ma19010145}
}
EUVIMED