Development of handling energy factors for use of dustiness data in exposure assessment modelling
Annals of Work Exposures and Health · 2024
DOI: 10.1093/annweh/wxae009 ↗Kurz gefasst
Fachartikel in der Zeitschrift Annals of Work Exposures and Health, 2024. Verfasst von Ana Sofia Fonseca und 4 weiteren Autor:innen. Beteiligte Einrichtung: National Research Centre for the Working Environment (NRCWE), Lersø Parkallé 105, DK-2100 Copenhagen, Denmark. Hauptthemen laut MEDLINE: Air Pollutants, Occupational, Occupational Exposure. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon 2020 research and innovation programme, European Union's Horizon 2020, European Union’s Horizon 2020.
Abstract (Originalsprache)
Several exposure assessment models use dustiness as an input parameter for scaling or estimating exposure during powder handling. Use of different dustiness methods will result in considerable differences in the dustiness values as they are based on different emission generation principles. EN17199:2019 offers 4 different dustiness test methods considering different dust release scenarios (e.g. powder pouring, mixing and gentle agitation, and vibration). Conceptually, the dustiness value by a given method can be multiplied with a scenario-specific modifier, called a handling energy factor (Hi), that allows conversion of a dustiness value to a release constant. Therefore, a Hi, scaling the effective mechanical energy in the process to the energy supplied in the specific dustiness test, needs to be applied. To improve the accuracy in predictive exposure modelling, we derived experimental Hi to be used in exposure algorithms considering both the mass- and number-based dust release fraction determined by the EN17199-3 continuous drop (CD) and the EN17199-4 small rotating drum (SRD) test methods. Three materials were used to evaluate the relationship between dustiness and dust levels during pouring powder from different heights in a controlled environment. The results showed increasing scatter and difference between the Hi derived for the 2 test methods with increasing pouring height. Nearly all the Hi values obtained for both SRD and CD were <1 indicating that the dustiness tests involved more energy input than the simulated pouring activity and consequently de-agglomeration and dust generation were higher. This effect was most pronounced in CD method showing that SRD mechanistically resembles more closely the powder pouring.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- National Research Centre for the Working Environment (NRCWE), Lersø Parkallé 105, DK-2100 Copenhagen, Denmark.
- Federal Institute for Occupational Safety and Health (BAuA), Nöldnerstr. 40-42, 10317 Berlin, Germany.
- TNO, Risk Assessment of Products In Development, Utrechtseweg 48, 3704 HE Zeist, Netherlands.
ORCID-Profile: Ana Sofia Fonseca, Neeraj Shandilya
Förderung
- European Union's Horizon 2020 research and innovation programme
- European Union's Horizon 2020
- European Union’s Horizon 2020
Zitieren
APA
Fonseca, A. S., Ribalta, C., Shandilya, N., Fransman, W., & Alstrup Jensen, K. (2024). Development of handling energy factors for use of dustiness data in exposure assessment modelling. Annals of Work Exposures and Health. https://doi.org/10.1093/annweh/wxae009
Vancouver
Fonseca AS, Ribalta C, Shandilya N, Fransman W, Alstrup Jensen K. Development of handling energy factors for use of dustiness data in exposure assessment modelling. Annals of Work Exposures and Health. 2024. doi:10.1093/annweh/wxae009
BibTeX
@article{Fonseca2024,
author = {Fonseca, Ana Sofia and Ribalta, Carla and Shandilya, Neeraj and Fransman, Wouter and Alstrup Jensen, Keld},
title = {Development of handling energy factors for use of dustiness data in exposure assessment modelling},
journal = {Annals of Work Exposures and Health},
year = {2024},
doi = {10.1093/annweh/wxae009}
}
EUVIMED