EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Workplace Exposure Measurements of Emission from Industrial 3D Printing

Anneli Kangas, Kirsi Kukko, Tomi Kanerva iD, Arto Säämänen iD, Jan Sher Akmal, Jouni Partanen, Anna-Kaisa Viitanen iD

Annals of Work Exposures and Health · 2023

DOI: 10.1093/annweh/wxad006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annals of Work Exposures and Health, 2023. Verfasst von Anneli Kangas und 6 weiteren Autor:innen. Beteiligte Einrichtung: Finnish Institute of Occupational Health, P.O. Box 40, FI-00032 Työterveyslaitos, Finland. Hauptthemen laut MEDLINE: Occupational Exposure, Air Pollutants, Occupational. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Finnish Work Environment Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Particle and gaseous contaminants from industrial scale additive manufacturing (AM) machines were studied in three different work environments. Workplaces utilized powder bed fusion, material extrusion, and binder jetting techniques with metal and polymer powders, polymer filaments, and gypsum powder, respectively. The AM processes were studied from operator’s point of view to identify exposure events and possible safety risks. Total number of particle concentrations were measured in the range of 10 nm to 300 nm from operator’s breathing zone using portable devices and in the range of 2.5 nm to 10 µm from close vicinity of the AM machines using stationary measurement devices. Gas-phase compounds were measured with photoionization, electrochemical sensors, and an active air sampling method which were eventually followed by laboratory analyses. The duration of the measurements varied from 3 to 5 days during which the manufacturing processes were practically continuous. We identified several work phases in which an operator can potentially be exposed by inhalation (pulmonary exposure) to airborne emissions. A skin exposure was also identified as a potential risk factor based on the observations made on work tasks related to the AM process. The results confirmed that nanosized particles were present in the breathing air of the workspace when the ventilation of the AM machine was inadequate. Metal powders were not measured from the workstation air thanks to the closed system and suitable risk control procedures. Still, handling of metal powders and AM materials that can act as skin irritants such as epoxy resins were found to pose a potential risk for workers. This emphasizes the importance of appropriate control measures for ventilation and material handling that should be addressed in AM operations and environment.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Occupational ExposureAir Pollutants, OccupationalHumansPowdersWorkplacePolymersPrinting, Three-DimensionalParticle Size

Stichwörter der Autor:innen

additive manufacturinggas-phase compoundsindustrial printersnanoparticlesoccupational health

Substanzen

Air Pollutants, OccupationalPowdersPolymers

Autor:innen und Institutionen

  • Finnish Institute of Occupational Health, P.O. Box 40, FI-00032 Työterveyslaitos, Finland.
  • Department of Mechanical Engineering, Aalto University, FI-00076 Aalto, Finland.

ORCID-Profile: Tomi Kanerva, Arto Säämänen, Anna-Kaisa Viitanen

Förderung

  • Finnish Work Environment Fund

Zitieren

APA

Kangas, A., Kukko, K., Kanerva, T., Säämänen, A., Akmal, J. S., Partanen, J., & Viitanen, A. K. (2023). Workplace Exposure Measurements of Emission from Industrial 3D Printing. Annals of Work Exposures and Health. https://doi.org/10.1093/annweh/wxad006

Vancouver

Kangas A, Kukko K, Kanerva T, Säämänen A, Akmal JS, Partanen J, et al. Workplace Exposure Measurements of Emission from Industrial 3D Printing. Annals of Work Exposures and Health. 2023. doi:10.1093/annweh/wxad006

BibTeX
@article{Kangas2023,
  author = {Kangas, Anneli and Kukko, Kirsi and Kanerva, Tomi and Säämänen, Arto and Akmal, Jan Sher and Partanen, Jouni and Viitanen, Anna-Kaisa},
  title = {Workplace Exposure Measurements of Emission from Industrial 3D Printing},
  journal = {Annals of Work Exposures and Health},
  year = {2023},
  doi = {10.1093/annweh/wxad006}
}
Kostenlos starten →