A Preprogrammable Continuum Robot Inspired by Elephant Trunk for Dexterous Manipulation
Soft Robotics · 01.06.2023 · 10 (3) · 636-646
DOI: 10.1089/soro.2022.0048 ↗Kurz gefasst
Fachartikel in der Zeitschrift Soft Robotics, online erschienen am 11.01.2023. Verfasst von Jie Zhang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Aeronautics and Astronautics, Sun Yat-Sen University, Shenzhen, P.R. China. Hauptthemen laut MEDLINE: Robotics. Die Arbeit wurde bisher 108-mal zitiert (Crossref) und nennt 34 Literaturangaben.
Abstract (Originalsprache)
Cable-driven continuum robots with hyper-redundant deformable backbones show great promise in applications, such as inspection in unstructured environments, where traditional rigid robots with discrete links and joints fail to operate. However, the motion of existing continuum robots is still constrained by their homogeneous backbones, and limited to environments with modest geometrical complexity. In this study, inspired by highly deformable elephant trunks, we presented a modular tensegrity structure with preprogrammable stiffness for continuum robots. Then we derived a mechanical model based on a positional formulation finite element method for predicting the configuration of the structure in different deformation scenarios. Theoretical predictions revealed that the curvature of each segment could be regulated by preprogramming their spring stiffness. Hence, our customizable design could offer an effective route for efficient robotic interactions. We further fabricated a continuum robot consisting of 12 modules, and showcased its deformation patterns under multiple scenarios. By regulating the distribution of spring stiffness, our robot could move through channels with varying curvatures, exhibiting its potential for applications where varying curvature, and conformal and efficient interactions are needed. Leveraging the inherent intelligence, this robotic system could simplify the complexity of the required actuation and control systems.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Aeronautics and Astronautics, Sun Yat-Sen University, Shenzhen, P.R. China.
- School of Mechanical Engineering, Dalian University of Technology, Dalian, P.R. China.
- School of Engineering and Technology, China University of Geosciences, Beijing, P.R. China.
- Division of Mechanical Engineering and Design, School of Engineering, London South Bank University, London, United Kingdom.
- Mechanical Intelligence Research Group, Bio-Engineering Research Centre (BERC), School of Engineering, London South Bank University, London, United Kingdom.
- State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian, P.R. China.
Zitieren
APA
Zhang, J., Li, Y., Kan, Z., Yuan, Q., Rajabi, H., Wu, Z., Peng, H., & Wu, J. (2023). A Preprogrammable Continuum Robot Inspired by Elephant Trunk for Dexterous Manipulation. Soft Robotics, 10(3), 636-646. https://doi.org/10.1089/soro.2022.0048
Vancouver
Zhang J, Li Y, Kan Z, Yuan Q, Rajabi H, Wu Z, et al. A Preprogrammable Continuum Robot Inspired by Elephant Trunk for Dexterous Manipulation. Soft Robotics. 2023;10(3):636-646. doi:10.1089/soro.2022.0048
BibTeX
@article{Zhang2023,
author = {Zhang, Jie and Li, You and Kan, Ziyun and Yuan, Qiufeng and Rajabi, Hamed and Wu, Zhigang and Peng, Haijun and Wu, Jianing},
title = {A Preprogrammable Continuum Robot Inspired by Elephant Trunk for Dexterous Manipulation},
journal = {Soft Robotics},
year = {2023},
volume = {10},
number = {3},
pages = {636--646},
doi = {10.1089/soro.2022.0048}
}
EUVIMED