EUVIMEDEUVIMED entdecken
Open Access

Circumventing Solidification Cracking Susceptibility in Al–Cu Alloys Prepared by Laser Powder Bed Fusion

Lixia Xi iD, Qiuyang Lu, Dongdong Gu iD, Shaoting Cao, Han Zhang, Ivan Kaban, Baran Sarac, Konda Gokuldoss Prashanth, Jürgen Eckert

3D Printing and Additive Manufacturing · 01.04.2024 · 11 (2) · 731-742

DOI: 10.1089/3dp.2022.0207 ↗

Kurz gefasst

Fachartikel in der Zeitschrift 3D Printing and Additive Manufacturing, online erschienen am 16.04.2024. Verfasst von Lixia Xi und 8 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Provincial Engineering Laboratory for Laser Additive Manufacturing of High-Performance Metallic Components, College of Materials Science and …. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (LPBF) of Al–Cu alloys shows high susceptibility to cracking due to a wide solidification temperature range. In this work, 2024 alloys were manufactured by LPBF at different laser processing parameters. The effect of processing parameters on the densification behavior and mechanical properties of the LPBF-processed 2024 alloys was investigated. The results show that the porosity increases significantly with increasing laser power, while the number of cracks and lack-of-fusion defects increase distinctly with increasing scan speed. The solidification cracking susceptibility of the LPBF-processed 2024 alloys prepared at different processing parameters was analyzed based on a finite element model, which was accurately predicted by theoretical calculations. Dense and crack-free 2024 samples with a high densification of over 98.1% were manufactured at a low laser power of 200 W combined with a low laser scan speed of 100 mm/s. The LPBF-processed 2024 alloys show a high hardness of 110 ± 4 HV 0.2 , an ultimate tensile strength of 300 ± 15 MPa, and an elongation of ∼3%. This work can serve as reference for obtaining crack-free and high-performance Al–Cu alloys by LPBF.

Schlagwörter

Stichwörter der Autor:innen

Al–Cu alloylaser powder bed fusion (LPBF)microstructurepropertiessolidification crack

Autor:innen und Institutionen

  • Jiangsu Provincial Engineering Laboratory for Laser Additive Manufacturing of High-Performance Metallic Components, College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjin…
  • IFW Dresden, Institute for Complex Materials, Dresden, Germany.
  • Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Leoben, Austria.
  • Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Tallinn, Estonia.
  • Center for Biomaterials, Cellular and Molecular Theranostics, School of Mechanical Engineering, Vellore Institute of Technology, Tamil Nadu, India.
  • Chair of Materials Physics, Department of Materials Science, Montanuniversität Leoben, Leoben, Austria.

ORCID-Profile: Lixia Xi, Dongdong Gu

Zitieren

APA

Xi, L., Lu, Q., Gu, D., Cao, S., Zhang, H., Kaban, I., Sarac, B., Prashanth, K. G., & Eckert, J. (2024). Circumventing Solidification Cracking Susceptibility in Al–Cu Alloys Prepared by Laser Powder Bed Fusion. 3D Printing and Additive Manufacturing, 11(2), 731-742. https://doi.org/10.1089/3dp.2022.0207

Vancouver

Xi L, Lu Q, Gu D, Cao S, Zhang H, Kaban I, et al. Circumventing Solidification Cracking Susceptibility in Al–Cu Alloys Prepared by Laser Powder Bed Fusion. 3D Printing and Additive Manufacturing. 2024;11(2):731-742. doi:10.1089/3dp.2022.0207

BibTeX
@article{Xi2024,
  author = {Xi, Lixia and Lu, Qiuyang and Gu, Dongdong and Cao, Shaoting and Zhang, Han and Kaban, Ivan and Sarac, Baran and Prashanth, Konda Gokuldoss and Eckert, Jürgen},
  title = {Circumventing Solidification Cracking Susceptibility in Al–Cu Alloys Prepared by Laser Powder Bed Fusion},
  journal = {3D Printing and Additive Manufacturing},
  year = {2024},
  volume = {11},
  number = {2},
  pages = {731--742},
  doi = {10.1089/3dp.2022.0207}
}
Kostenlos starten →