Printed wideband 28 GHz antenna for fan-out wafer level package applications
Flexible and Printed Electronics · 01.09.2026 · 11 (3) · 035011
DOI: 10.1088/2058-8585/ae96bb ↗Kurz gefasst
Fachartikel in der Zeitschrift Flexible and Printed Electronics, online erschienen am 20.08.2026. Verfasst von Ying Ying Lim und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben.
Abstract (Originalsprache)
Antenna-in-packages (AiPs) are often used in fan out wafer level packages for high frequency applications as smaller footprints could be obtained. However AiPs are often realized using subtractive processes. On the design side, one challenge is in terms of realizing a wideband antenna which is compact and has a high gain. To overcome these challenges, we propose a novel concept of using an additive process to realize an antenna in a substrate-process demonstrator inspired by fan-out wafer level package material. Specifically, a modified Yagi–Uda antenna with an unbalanced feed is designed on a low loss mold substrate. An additive-based fabrication process is developed for a mold material of small thickness to demonstrate a 28 GHz antenna. Following that, thermo-mechanical simulations are also performed to analyze the effect of the fabrication process on the substrate warpage. In addition, mesh patterns are also introduced in the antenna design to study the effect of metal density on the warpage. Antenna measurements yield a peak gain of 6.9 dBi and a bandwidth of 2.1 GHz. Further analysis is also performed through a correlation of the simulation with measurement results. The results are promising towards the realization of more sustainable fabrication processes in semiconductor packaging.
Zitieren
APA
Lim, Y. Y., Ameya, M., Feng, W., Kato, Y., Itagaki, M., & Nomura, K. (2026). Printed wideband 28 GHz antenna for fan-out wafer level package applications. Flexible and Printed Electronics, 11(3), 035011. https://doi.org/10.1088/2058-8585/ae96bb
Vancouver
Lim YY, Ameya M, Feng W, Kato Y, Itagaki M, Nomura K. Printed wideband 28 GHz antenna for fan-out wafer level package applications. Flexible and Printed Electronics. 2026;11(3):035011. doi:10.1088/2058-8585/ae96bb
BibTeX
@article{Lim2026,
author = {Lim, Ying Ying and Ameya, Michitaka and Feng, Wei and Kato, Yuto and Itagaki, Motoshi and Nomura, Ken-ichi},
title = {Printed wideband 28 GHz antenna for fan-out wafer level package applications},
journal = {Flexible and Printed Electronics},
year = {2026},
volume = {11},
number = {3},
pages = {035011},
doi = {10.1088/2058-8585/ae96bb}
}
EUVIMED