Particle capture mechanism and friction-reducing effect of vortex structures in continuous micro-groove textures fabricated by ball-end milling under lubricated conditions
Surface Topography: Metrology and Properties · 01.12.2026 · 14 (4) · 045009
DOI: 10.1088/2051-672x/aeb4cf ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Topography: Metrology and Properties, online erschienen am 29.10.2026. Verfasst von Weimin Huang und 6 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: Natural Science Foundation of Shandong Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Surface texturing has been widely used to improve the performance of friction pairs. However, existing studies have mainly focused on the role of texture geometry in wear-debris storage, whereas the mechanisms by which the internal flow field of textures regulates particle migration, retention, and friction reduction remain unclear. In this study, continuous micro-groove textures were fabricated by ball-end milling. Fluent numerical simulations and reciprocating friction tests were conducted to systematically investigate the capture behavior of micrometer-sized solid particles induced by vortex structures inside the micro-grooves and their effects on the friction-reducing performance of the textured surface. The results show that the local geometric expansion at the micro-groove inlet induces a stable vortex, which governs particle entry, migration, and retention through shear-layer entrainment and recirculating transport. The introduced particles do not merely act as passively accommodated objects; instead, they modify the spatial scale of the vortex and the velocity-gradient distribution near the groove opening through particle–fluid momentum exchange. When the particle diameter is 2 μ m and the mass fraction is 0.7% under the investigated conditions, the vortex inside the groove is moderately weakened, internal recirculation dissipation is reduced, and the hydrodynamic wedge effect is enhanced, resulting in a 5.7% increase in the load-carrying capacity of the oil film compared with the particle-free condition. The friction test results indicate that the coefficient of friction first decreases and then increases with increasing particle diameter, reaching its minimum at 2 μ m within the investigated particle size range. This study clarifies the vortex-dominated particle capture and friction-reduction mechanism in continuous micro-grooves, providing a theoretical basis for the design of textured surfaces and the optimization of particle-containing lubrication systems.
Förderung
- Natural Science Foundation of Shandong Province
- National Natural Science Foundation of China
Zitieren
APA
Huang, W., Shen, Y., Wang, G., Yang, J., Xue, Z., Liu, X., & Wang, Z. (2026). Particle capture mechanism and friction-reducing effect of vortex structures in continuous micro-groove textures fabricated by ball-end milling under lubricated conditions. Surface Topography: Metrology and Properties, 14(4), 045009. https://doi.org/10.1088/2051-672x/aeb4cf
Vancouver
Huang W, Shen Y, Wang G, Yang J, Xue Z, Liu X, et al. Particle capture mechanism and friction-reducing effect of vortex structures in continuous micro-groove textures fabricated by ball-end milling under lubricated conditions. Surface Topography: Metrology and Properties. 2026;14(4):045009. doi:10.1088/2051-672x/aeb4cf
BibTeX
@article{Huang2026,
author = {Huang, Weimin and Shen, Yaoyao and Wang, Guijie and Yang, Jixin and Xue, Zhenhao and Liu, Xiaomeng and Wang, Zixuan},
title = {Particle capture mechanism and friction-reducing effect of vortex structures in continuous micro-groove textures fabricated by ball-end milling under lubricated conditions},
journal = {Surface Topography: Metrology and Properties},
year = {2026},
volume = {14},
number = {4},
pages = {045009},
doi = {10.1088/2051-672x/aeb4cf}
}
EUVIMED