EUVIMEDEUVIMED entdecken
Crossref

Selective laser melting of CoCrMo-Ti6Al4V bimetallic composites: fabrication, characterization, and cytocompatibility

Sijing Lin iD, Tiantian Gao, Sung-Min Chung, In-Seop Lee iD, Cen Chen

Biomedical Materials · 01.08.2026 · 21 (4) · 045027

DOI: 10.1088/1748-605x/ae9232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Materials, online erschienen am 07.08.2026. Verfasst von Sijing Lin und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Life Sciences and Medicine, Zhejiang Sci-Tech University, Hangzhou 310018, Zhejiang Province, People's Republic of China. Hauptthemen laut MEDLINE: Biocompatible Materials, Titanium, Vitallium. Die Arbeit nennt 47 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bimetallic structures integrating Ti6Al4V and CoCrMo alloys present a promising strategy for advanced orthopedic implants by synergistically combining high fracture toughness with excellent wear resistance. However, the direct fabrication of these dissimilar metals via selective laser melting (SLM) is significantly hindered by metallurgical incompatibility and high residual stress, which frequently lead to interfacial delamination and edge warping. In this study, a CoCrMo-Ti6Al4V bimetallic composite was successfully fabricated using SLM. To overcome manufacturing defects, a CoCrMo transition layer printed with low laser energy density was employed as a mechanical buffer to mitigate residual stresses, while optimized external support structures provided physical anchoring to suppress geometric distortion. The microstructural evolution, elemental distribution, and phase composition were systematically characterized using field-emission scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffraction. Mechanical performance was evaluated through hardness and sliding wear tests, while the biological response was assessed using human bone marrow mesenchymal stem cells (BMSCs). The results demonstrated that the three-layer architecture effectively eliminated macroscopic defects and ensured structural integrity. Furthermore, the composite exhibited a substantial enhancement in surface hardness and wear resistance, achieving an interfacial bonding strength of 43.21 ± 1.07 MPa. Fracture analysis revealed a cohesive failure mode within the transition layer, indicating robust metallurgical bonding between the dissimilar components. In vitro assessments confirmed excellent cytocompatibility, exhibiting high cell viability (>95%) and proliferation on the composite surfaces. Ultimately, this research establishes a reliable fabrication methodology for complex bimetallic components, offering broad application prospects in personalized medical devices, joint replacements, and tissue engineering.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biocompatible MaterialsTitaniumVitalliumAlloysMesenchymal Stem CellsHumansMaterials TestingLasersHardnessSurface PropertiesStress, MechanicalCells, CulturedCell SurvivalCell ProliferationMicroscopy, Electron, ScanningX-Ray Diffraction

Stichwörter der Autor:innen

additive manufacturingbimetallic compositesbiocompatibilitymechanical propertiesselective laser melting

Substanzen

Alloystitanium alloy (TiAl6V4)Biocompatible MaterialsTitaniumVitallium

Autor:innen und Institutionen

  • College of Life Sciences and Medicine, Zhejiang Sci-Tech University, Hangzhou 310018, Zhejiang Province, People's Republic of China.
  • Biomaterials R&D Center, GENOSS Co., Ltd, Suwon-si 443-270, Republic of Korea.
  • Institute of Natural Sciences, Yonsei University, Seoul 03722, Republic of Korea.

ORCID-Profile: Sijing Lin, In-Seop Lee

Zitieren

APA

Lin, S., Gao, T., Chung, S. M., Lee, I. S., & Chen, C. (2026). Selective laser melting of CoCrMo-Ti6Al4V bimetallic composites: fabrication, characterization, and cytocompatibility. Biomedical Materials, 21(4), 045027. https://doi.org/10.1088/1748-605x/ae9232

Vancouver

Lin S, Gao T, Chung SM, Lee IS, Chen C. Selective laser melting of CoCrMo-Ti6Al4V bimetallic composites: fabrication, characterization, and cytocompatibility. Biomedical Materials. 2026;21(4):045027. doi:10.1088/1748-605x/ae9232

BibTeX
@article{Lin2026,
  author = {Lin, Sijing and Gao, Tiantian and Chung, Sung-Min and Lee, In-Seop and Chen, Cen},
  title = {Selective laser melting of CoCrMo-Ti6Al4V bimetallic composites: fabrication, characterization, and cytocompatibility},
  journal = {Biomedical Materials},
  year = {2026},
  volume = {21},
  number = {4},
  pages = {045027},
  doi = {10.1088/1748-605x/ae9232}
}
Kostenlos starten →