Experimental and modeling study on pull-off force of fibrillar adhesives
Bioinspiration & Biomimetics · 31.07.2025 · 20 (4) · 046011
DOI: 10.1088/1748-3190/ade217 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioinspiration & Biomimetics, online erschienen am 19.06.2025. Verfasst von Ru-Guo Ji und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Ocean Engineering, Key Laboratory of Hydrodynamics of Ministry of Education, Shanghai Jiao Tong University, Shanghai 200240, …. Hauptthemen laut MEDLINE: Adhesives, Biomimetic Materials. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
In recent years, the use of isotropic bionic fibrillar adhesives (BFA) in space non-cooperative target capture missions has become a research hotspot in the aerospace field. However, accurately evaluating the adhesion performance of these materials remains a critical challenge. To bridge this gap, we experimentally investigate the detachment behavior of two representative BFA types: mushroom-shaped fibrillar adhesives and flat-shaped fibrillar adhesives. The experimental results reveal that the critical detachment force (i.e. pull-off force) is significantly influenced by preload, detachment velocity, and detachment angle. Unlike the monotonic effects observed for preload and velocity, the detachment angle exhibits a non-monotonic relationship with the pull-off force. Specifically, as the detachment angle increases from 0° to 90°, the pull-off force first decreases and then increases. Further experimental validation and numerical simulations indicate that the equivalent bending moment induced by the pull-off force modulates the critical detachment angle—a phenomenon not reported in the existing literature. In addition, the fracture mode transitions from bilateral to unilateral crack propagation as the detachment angle decreases. Simulation results further demonstrate that the detachment angle alters the stress distribution at the adhesive interface, thereby affecting the crack propagation mode. Based on these findings, an approximate pull-off force model for BFA specimens is developed using linear elastic fracture mechanics, which incorporates the effects of preload, detachment velocity, and detachment angle. Following parameter identification, the proposed model accurately predicts the pull-off force for various loading conditions.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Ocean Engineering, Key Laboratory of Hydrodynamics of Ministry of Education, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China.
- Shanghai Aerospace Control Technology Institute, Shanghai 201109, People's Republic of China.
- Shanghai Key Laboratory of Aerospace Intelligent Control Technology, Shanghai 201109, People's Republic of China.
- College of Electrical Engineering, Shanghai Jiaotong University, Shanghai 200240, People's Republic of China.
ORCID-Profile: Xiao-Feng Liu
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Ji, R. G., Yuan, Y. Y., Liu, X. F., Zhang, X. L., Wang, F. H., & Cai, G. P. (2025). Experimental and modeling study on pull-off force of fibrillar adhesives. Bioinspiration & Biomimetics, 20(4), 046011. https://doi.org/10.1088/1748-3190/ade217
Vancouver
Ji RG, Yuan YY, Liu XF, Zhang XL, Wang FH, Cai GP. Experimental and modeling study on pull-off force of fibrillar adhesives. Bioinspiration & Biomimetics. 2025;20(4):046011. doi:10.1088/1748-3190/ade217
BibTeX
@article{Ji2025,
author = {Ji, Ru-Guo and Yuan, Yue-Yu and Liu, Xiao-Feng and Zhang, Xiao-Long and Wang, Feng-Hua and Cai, Guo-Ping},
title = {Experimental and modeling study on pull-off force of fibrillar adhesives},
journal = {Bioinspiration & Biomimetics},
year = {2025},
volume = {20},
number = {4},
pages = {046011},
doi = {10.1088/1748-3190/ade217}
}
EUVIMED