EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermally recoverable PLA/TPU hooks for durable 4D-printed mechanical interlocks

Rahaf Homssi, Maria I Vallejo Ciro, Manuel J Carvajal Loaiza, Albert E Patterson, Vanessa Restrepo

Smart Materials and Structures · 01.05.2026 · 35 (5) · 055029

DOI: 10.1088/1361-665x/ae65ea ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 15.05.2026. Verfasst von Rahaf Homssi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reversible mechanical interlocking is widely used in fastening and attachment systems, yet polymer-based interlocks typically suffer from irreversible deformation and progressive loss of load-bearing capacity under repeated use. This work presents a 4D-printed laminate architecture that integrates stiff shape-memory polylactic acid (PLA) with compliant thermoplastic polyurethane (TPU) to enable recoverable, fatigue-resistant interlocking interfaces. By spatially organizing the two polymers into a controlled sandwich architecture, shape-memory functionality is decoupled from the stiffness of PLA and ductility of TPU, allowing mechanical performance and recoverability to be independently tuned. The thermomechanical response of the laminates was characterized under cyclic programming and recovery at two activation temperatures. Programming near the glass transition temperature resulted in architecture-dependent recovery stability, whereas activation near the cold-crystallization regime produced uniformly high shape fixity and high recoverability across all laminates. When implemented in bio-inspired hook geometries, the optimized laminates exhibited improved cyclic interlocking performance compared to monolithic PLA. While single-hook designs remained susceptible to fatigue due to stress localization, a double-hook geometry distributed load more effectively, suppressed interfacial delamination, and preserved both force and energy dissipation under repeated cycling with thermal recovery. These results establish a material and architecture framework for reusable, shape memory-enabled interlocking systems fabricated via multi-material additive manufacturing.

Zitieren

APA

Homssi, R., Ciro, M. I. V., Loaiza, M. J. C., Patterson, A. E., & Restrepo, V. (2026). Thermally recoverable PLA/TPU hooks for durable 4D-printed mechanical interlocks. Smart Materials and Structures, 35(5), 055029. https://doi.org/10.1088/1361-665x/ae65ea

Vancouver

Homssi R, Ciro MIV, Loaiza MJC, Patterson AE, Restrepo V. Thermally recoverable PLA/TPU hooks for durable 4D-printed mechanical interlocks. Smart Materials and Structures. 2026;35(5):055029. doi:10.1088/1361-665x/ae65ea

BibTeX
@article{Homssi2026,
  author = {Homssi, Rahaf and Ciro, Maria I Vallejo and Loaiza, Manuel J Carvajal and Patterson, Albert E and Restrepo, Vanessa},
  title = {Thermally recoverable PLA/TPU hooks for durable 4D-printed mechanical interlocks},
  journal = {Smart Materials and Structures},
  year = {2026},
  volume = {35},
  number = {5},
  pages = {055029},
  doi = {10.1088/1361-665x/ae65ea}
}
Kostenlos starten →