Dual‐Stimuli Responsive and Sustainable PLA/APHA/TPU Blend for 4D Printing
Macromolecular Rapid Communications · 2025-11 · 46 (21)
DOI: 10.1002/marc.202500414 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, online erschienen am 14.08.2025. Verfasst von Shafahat Ali und 4 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Manufacturing Lab (AML) School of Engineering, University of Guelph, Guelph, Ontario, Canada. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Polyesters, Polymers. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science and Engineering Research Council of Canada, GENESIS Bioindustries.
Abstract (Originalsprache)
4D printing of shape memory polymers (SMPs) offers transformative potential for patient‐specific medical devices, yet current SMPs often face a trade‐off between mechanical toughness and low‐temperature activation. This study presents a novel PLA/APHA/TPU blend filament for 3D printing that overcomes this limitation by combining high strength and flexibility with low‐temperature shape memory activation—features not previously achieved in PLA‐based SMPs. The uniform dispersion of TPU and APHA in the PLA matrix creates a composite with enhanced tensile strength, modulus, and elongation, addressing the brittleness typical of neat PLA. The optimized 60/20/20 wt.% formulation enables rapid shape recovery at ∼39.5°C, significantly below PLA's glass transition, with near‐complete shape fixity (∼100%) and high recovery ratios (>92%) under both thermal and mechanical stimuli. This dual‐responsive behavior is driven by the synergistic roles of TPU (providing ductility) and APHA (enhancing flexibility and thermal sensitivity). The composite also retains excellent printability and biocompatibility, making it ideal for next‐generation biomedical SMP applications such as 4D‐printed orthopedic braces, soft robotic actuators, and adaptive implants. Using bio‐based, biodegradable polymers, this work advances eco‐friendly, high‐performance SMPs for additive manufacturing, setting a new benchmark for PLA‐based 4D‐printable materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Advanced Manufacturing Lab (AML) School of Engineering, University of Guelph, Guelph, Ontario, Canada.
- Australian College of Kuwait, Kuwait.
- Department of Industrial and Mechanical Engineering, Rochester Institute of Technology, Dubai, United Arab Emirates.
ORCID-Profile: Shafahat Ali
Förderung
- Natural Science and Engineering Research Council of Canada
- GENESIS Bioindustries
Zitieren
APA
Ali, S., Alshihabi, M., Beard, L., Deiab, I., & Pervaiz, S. (2025). Dual‐Stimuli Responsive and Sustainable PLA/APHA/TPU Blend for 4D Printing. Macromolecular Rapid Communications, 46(21). https://doi.org/10.1002/marc.202500414
Vancouver
Ali S, Alshihabi M, Beard L, Deiab I, Pervaiz S. Dual‐Stimuli Responsive and Sustainable PLA/APHA/TPU Blend for 4D Printing. Macromolecular Rapid Communications. 2025;46(21). doi:10.1002/marc.202500414
BibTeX
@article{Ali2025,
author = {Ali, Shafahat and Alshihabi, Mamoun and Beard, Logan and Deiab, Ibrahim and Pervaiz, Salman},
title = {Dual‐Stimuli Responsive and Sustainable PLA/APHA/TPU Blend for 4D Printing},
journal = {Macromolecular Rapid Communications},
year = {2025},
volume = {46},
number = {21},
doi = {10.1002/marc.202500414}
}
EUVIMED