EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Noise-based correction for electrical impedance tomography

Kai Mason iD, Florencia Maurino-Alperovich, David Holder iD, Kirill Aristovich iD

Physiological Measurement · 2024

DOI: 10.1088/1361-6579/ad4e93 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physiological Measurement, 2024. Verfasst von Kai Mason und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Medical Physics and Biomedical Engineering, University College London, London, United Kingdom. Hauptthemen laut MEDLINE: Electric Impedance, Tomography, Signal-To-Noise Ratio. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective. Noisy measurements frequently cause noisy and inaccurate images in impedance imaging. No post-processing technique exists to calculate the propagation of measurement noise and use this to suppress noise in the image. The objectives of this work were (1) to develop a post-processing method for noise-based correction (NBC) in impedance tomography, (2) to test whether NBC improves image quality in electrical impedance tomography (EIT), (3) to determine whether it is preferable to use correlated or uncorrelated noise for NBC, (4) to test whether NBC works with in vivo data and (5) to test whether NBC is stable across model and perturbation geometries. Approach. EIT was performed in silico in a 2D homogeneous circular domain and an anatomically realistic, heterogeneous 3D human head domain for four perturbations and 25 noise levels in each case. This was validated by performing EIT for four perturbations in a circular, saline tank in 2D as well as a human head-shaped saline tank with a realistic skull-like layer in 3D. Images were assessed on the error in the weighted spatial variance (WSV) with respect to the true, target image. The effect of NBC was also tested for in vivo EIT data of lung ventilation in a human thorax and cortical activity in a rat brain. Main results. On visual inspection, NBC maintained or increased image quality for all perturbations and noise levels in 2D and 3D, both experimentally and in silico . Analysis of the WSV showed that NBC significantly improved the WSV in nearly all cases. When the WSV was inferior with NBC, this was either visually imperceptible or a transformation between noisy reconstructions. For in vivo data, NBC improved image quality in all cases and preserved the expected shape of the reconstructed perturbation. Significance. In practice, uncorrelated NBC performed better than correlated NBC and is recommended as a general-use post-processing technique in EIT.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Electric ImpedanceTomographySignal-To-Noise RatioHumansAnimalsRatsImage Processing, Computer-AssistedHead

Stichwörter der Autor:innen

electrical impedance tomographyimage reconstructionnoise propagationpost-processing

Autor:innen und Institutionen

  • Department of Medical Physics and Biomedical Engineering, University College London, London, United Kingdom.

ORCID-Profile: Kai Mason, David Holder, Kirill Aristovich

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Mason, K., Maurino-Alperovich, F., Holder, D., & Aristovich, K. (2024). Noise-based correction for electrical impedance tomography. Physiological Measurement. https://doi.org/10.1088/1361-6579/ad4e93

Vancouver

Mason K, Maurino-Alperovich F, Holder D, Aristovich K. Noise-based correction for electrical impedance tomography. Physiological Measurement. 2024. doi:10.1088/1361-6579/ad4e93

BibTeX
@article{Mason2024,
  author = {Mason, Kai and Maurino-Alperovich, Florencia and Holder, David and Aristovich, Kirill},
  title = {Noise-based correction for electrical impedance tomography},
  journal = {Physiological Measurement},
  year = {2024},
  doi = {10.1088/1361-6579/ad4e93}
}
Kostenlos starten →