A microstructure-resolved crystal plasticity finite element model for strain-rate-dependent deformation of CMSX-4 nickel-based single crystal
Modelling and Simulation in Materials Science and Engineering · 15.12.2026 · 34 (8) · 085004
DOI: 10.1088/1361-651x/aebdae ↗Kurz gefasst
Fachartikel in der Zeitschrift Modelling and Simulation in Materials Science and Engineering, online erschienen am 12.11.2026. Verfasst von Rui Xiang und 7 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Gefördert von: National Natural Science Foundation of China, State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Dongfang Electric Corporation DongFang Boiler Co., Ltd.
Abstract (Originalsprache)
Microstructure-resolved crystal plasticity modelling provides an effective approach for analysing local plastic deformation in nickel-based single-crystal superalloys, where the macroscopic response is strongly affected by γ / γ ′ phase interactions. In this study, a dislocation-density-based crystal plasticity finite element model was implemented in the open-source MOOSE framework to investigate the deformation behaviour of CMSX-4 under [001] monotonic tensile loading at room temperature. Idealized two-phase representative volume elements were constructed, and phase-dependent resistance contributions were introduced to describe dislocation evolution, forest hardening, precipitate shearing resistance associated with anti-phase boundary and superlattice stacking fault mechanisms, and Orowan-type strengthening. The material parameters were calibrated using a genetic-algorithm-based inverse procedure based on experimental tensile stress–strain curves. The calibrated model captures the tensile responses at the investigated strain rates and provides spatially resolved effective plastic strain and mobile/immobile dislocation-density fields. The simulations show that the higher strain-rate condition promotes stronger local deformation gradients and dislocation accumulation near γ / γ ′ interfaces, leading to increased flow resistance. A numerical study with different characteristic γ ′ spacings further indicates that smaller precipitate spacing enhances the predicted stress response through Orowan-type resistance and intensified dislocation accumulation in γ channels. These results provide a computational basis for interpreting phase-resolved plastic deformation in γ / γ ′ single-crystal superalloys.
Förderung
- National Natural Science Foundation of China
- State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment
- Dongfang Electric Corporation DongFang Boiler Co., Ltd
Zitieren
APA
Xiang, R., Zhang, W., Wu, H., Wang, M., Lei, Z., Zhang, H., Liu, Y., & Wang, Q. (2026). A microstructure-resolved crystal plasticity finite element model for strain-rate-dependent deformation of CMSX-4 nickel-based single crystal. Modelling and Simulation in Materials Science and Engineering, 34(8), 085004. https://doi.org/10.1088/1361-651x/aebdae
Vancouver
Xiang R, Zhang W, Wu H, Wang M, Lei Z, Zhang H, et al. A microstructure-resolved crystal plasticity finite element model for strain-rate-dependent deformation of CMSX-4 nickel-based single crystal. Modelling and Simulation in Materials Science and Engineering. 2026;34(8):085004. doi:10.1088/1361-651x/aebdae
BibTeX
@article{Xiang2026,
author = {Xiang, Rui and Zhang, Wei and Wu, Hao and Wang, Mingkun and Lei, Zhilong and Zhang, Hong and Liu, Yongjie and Wang, Qingyuan},
title = {A microstructure-resolved crystal plasticity finite element model for strain-rate-dependent deformation of CMSX-4 nickel-based single crystal},
journal = {Modelling and Simulation in Materials Science and Engineering},
year = {2026},
volume = {34},
number = {8},
pages = {085004},
doi = {10.1088/1361-651x/aebdae}
}
EUVIMED