EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Spherical Indentation Behavior of DD6 Single-Crystal Nickel-Based Superalloy via Crystal Plasticity Finite Element Simulation

Xin Hao iD, Peng Zhang, Hao Xing, Mengchun You, Erqiang Liu iD, Xuegang Xing, Gesheng Xiao, Yongxi Tian

Materials · 04.08.2025 · 18 (15) · 3662

DOI: 10.3390/ma18153662 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.08.2025. Verfasst von Xin Hao und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shanxi Province, National Natural Science Foundation of China, Shanxi Scientific Research Initial Funding.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel-based superalloys are widely utilized in critical hot-end components, such as aeroengine turbine blades, owing to their exceptional high-temperature strength, creep resistance, and oxidation resistance. During service, these components are frequently subjected to complex localized loading, leading to non-uniform plastic deformation and microstructure evolution within the material. Combining nanoindentation experiments with the crystal plasticity finite element method (CPFEM), this study systematically investigates the effects of loading rate and crystal orientation on the elastoplastic deformation of DD6 alloy under spherical indenter loading. The results indicate that the maximum indentation depth increases and hardness decreases with prolonged loading time, exhibiting a significant strain rate strengthening effect. The CPFEM model incorporating dislocation density effectively simulates the nonlinear characteristics of the nanoindentation process and elucidates the evolution of dislocation density and slip system strength with indentation depth. At low loading rates, both dislocation density and slip system strength increase with loading time. Significant differences in mechanical behavior are observed across different crystal orientations, which correspond to the extent of lattice rotation during texture evolution. For the [111] orientation, crystal rotation is concentrated and highly regular, while the [001] orientation shows uniform texture evolution. This demonstrates that anisotropy governs the deformation mechanism through differential slip system activation and texture evolution.

Schlagwörter

Stichwörter der Autor:innen

crystal orientationcrystal plasticity simulationsingle-crystal nickel-based superalloyslip behaviorspherical indentation

Autor:innen und Institutionen

  • College of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China.
  • Shanxi Research Center of Basic Discipline of Mechanics, Taiyuan 030024, China.
  • Shanxi Key Laboratory of Material Strength and Structural Impact, College of Aeronautics and Astronautics, Taiyuan University of Technology, Taiyuan 030024, China.

ORCID-Profile: Xin Hao, Erqiang Liu

Förderung

  • Natural Science Foundation of Shanxi Province
  • National Natural Science Foundation of China
  • Shanxi Scientific Research Initial Funding
  • Research Project Supported by Shanxi Scholarship Council of China
  • Taiyuan University of Science and Technology Scientific Research Initial Funding
  • Scientific and Techno-logical Innovation Programs of Higher Education Institutions in Shanxi

Zitieren

APA

Hao, X., Zhang, P., Xing, H., You, M., Liu, E., Xing, X., Xiao, G., & Tian, Y. (2025). Spherical Indentation Behavior of DD6 Single-Crystal Nickel-Based Superalloy via Crystal Plasticity Finite Element Simulation. Materials, 18(15), 3662. https://doi.org/10.3390/ma18153662

Vancouver

Hao X, Zhang P, Xing H, You M, Liu E, Xing X, et al. Spherical Indentation Behavior of DD6 Single-Crystal Nickel-Based Superalloy via Crystal Plasticity Finite Element Simulation. Materials. 2025;18(15):3662. doi:10.3390/ma18153662

BibTeX
@article{Hao2025,
  author = {Hao, Xin and Zhang, Peng and Xing, Hao and You, Mengchun and Liu, Erqiang and Xing, Xuegang and Xiao, Gesheng and Tian, Yongxi},
  title = {Spherical Indentation Behavior of DD6 Single-Crystal Nickel-Based Superalloy via Crystal Plasticity Finite Element Simulation},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {15},
  pages = {3662},
  doi = {10.3390/ma18153662}
}
Kostenlos starten →