EUVIMEDEUVIMED entdecken
Crossref

Dynamic assessment of boundary lubrication film thickness using contact resistance techniques and its application in complex operating conditions

Jia Xin, Lu Huang, Jiahui Yang, Miao Sun

Measurement Science and Technology · 19.11.2026

DOI: 10.1088/1361-6501/aec46a ↗

Kurz gefasst

Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 19.11.2026. Verfasst von Jia Xin und 3 weiteren Autor:innen. Gefördert von: Fundamental Research Funds for NIM, china, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enable online, quantitative monitoring of boundary lubricating film thickness in mechanical equipment under complex conditions, the contact resistance method was used for dynamic measurement, calibration, and application of lubricating film thickness. A contact resistance measurement system was developed for steel ball-steel disc point contact. Spectrum analysis, circuit design optimization, and filtering technology showed a significant decrease in the interference signals between the servo driver and the wires. The standard deviation of zero-value resistance measurement dropped to 0.087 Ω, improving the signal-to-noise ratio and contact resistance measurement resolution, resulting in an optimal film thickness measurement resolution of 7.3 nm. Contact resistance measurements were performed using PAO lubricating oils with different viscosities (60.09 mm²/s to 648.86 mm²/s) under different loads (0.5 GPa to 0.9 GPa) and rolling speeds (2 mm/s to 120 mm/s). Optical interferometry measurements were employed to establish a mathematical model to map the dynamic contact resistance to the film thickness. The model yielded a fitting R² of 0.96 and a standard deviation of 2.33 nm. The self-developed system and mathematical model were employed to assess the film-forming characteristics of the steel-steel point-contact oil-lubrication interface during low-speed reciprocating motion and continuous rotation with starved oil. With its high measurement accuracy, this system effectively captured the point of reversal in reciprocating motion. Even at zero speed, the central film thickness in the contact area remained at 8 nm, attributed to transient confinement of the lubricating oil. Moreover, under starved conditions, continuous contact resistance monitoring reliably tracked the transition from elastohydrodynamic lubrication (~60 nm) to boundary lubrication (~20 nm). This work offers valuable insights for advancing the contact resistance method from qualitative laboratory analysis to quantitative engineering applications.

Förderung

  • Fundamental Research Funds for NIM, china
  • National Natural Science Foundation of China

Zitieren

APA

Xin, J., Huang, L., Yang, J., & Sun, M. (2026). Dynamic assessment of boundary lubrication film thickness using contact resistance techniques and its application in complex operating conditions. Measurement Science and Technology. https://doi.org/10.1088/1361-6501/aec46a

Vancouver

Xin J, Huang L, Yang J, Sun M. Dynamic assessment of boundary lubrication film thickness using contact resistance techniques and its application in complex operating conditions. Measurement Science and Technology. 2026. doi:10.1088/1361-6501/aec46a

BibTeX
@article{Xin2026,
  author = {Xin, Jia and Huang, Lu and Yang, Jiahui and Sun, Miao},
  title = {Dynamic assessment of boundary lubrication film thickness using contact resistance techniques and its application in complex operating conditions},
  journal = {Measurement Science and Technology},
  year = {2026},
  doi = {10.1088/1361-6501/aec46a}
}
Kostenlos starten →