EUVIMEDEUVIMED entdecken
Crossref

Design and experimental study of an in-situ indentation/scratch testing device with high load capacity for scanning electron microscope

Xianke Li, Shunbo Wang, Zerui Zhao, Xiangyu Zong, Cong Li, Shenghan Yue, Wenjuan Xing, Xinhang Yang, Hongwei Zhao

Measurement Science and Technology · 17.04.2026 · 37 (16) · 166003

DOI: 10.1088/1361-6501/ae526e ↗

Kurz gefasst

Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 22.04.2026. Verfasst von Xianke Li und 8 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Foundation for Innovative Research Groups of the National Natural Science Foundation of China, the Science and Technology Development Program Project of Jilin Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In situ indentation/scratch testing technique is a crucial method for analyzing material mechanics and damage evolution. However, conventional instruments suffer from limitations such as low load capacity and destructive backward motion. In this study, an in-situ indentation/scratch instrument coupled with scanning electron microscope was developed. Hybrid motor-piezoelectric actuation was designed, enabling ultra-long stroke loading and unloading free from mechanical backlash. The compact design incorporates a motor-driven XY stage with 40.5 mm Z -height, maintaining high load capacity while eliminating backlash errors. Integrated PID control, high-ratio reducers, and encoders achieve 10 nm s −1 –80 µm s −1 stepless motion with precise XYZ positioning, accommodating both coarse alignment and fine loading. Following calibration, functional tests were conducted on brittle monocrystalline silicon, Q235 steel, and galvanized coatings. The instrument captured crack initiation in silicon under hundred-millinewton loads and correlated subsurface/surface slip in coatings via deep indentation (54 μm). Indentation and backward-free scratch tests on Q235, along with mechanical properties derived from load-displacement curves, demonstrate the equipment’s precise testing capability and high data reliability across a broad load range and diverse material systems.

Förderung

  • National Natural Science Foundation of China
  • Foundation for Innovative Research Groups of the National Natural Science Foundation of China
  • the Science and Technology Development Program Project of Jilin Province
  • National Major Scientific Research Instrument Development Project

Zitieren

APA

Li, X., Wang, S., Zhao, Z., Zong, X., Li, C., Yue, S., Xing, W., Yang, X., & Zhao, H. (2026). Design and experimental study of an in-situ indentation/scratch testing device with high load capacity for scanning electron microscope. Measurement Science and Technology, 37(16), 166003. https://doi.org/10.1088/1361-6501/ae526e

Vancouver

Li X, Wang S, Zhao Z, Zong X, Li C, Yue S, et al. Design and experimental study of an in-situ indentation/scratch testing device with high load capacity for scanning electron microscope. Measurement Science and Technology. 2026;37(16):166003. doi:10.1088/1361-6501/ae526e

BibTeX
@article{Li2026,
  author = {Li, Xianke and Wang, Shunbo and Zhao, Zerui and Zong, Xiangyu and Li, Cong and Yue, Shenghan and Xing, Wenjuan and Yang, Xinhang and Zhao, Hongwei},
  title = {Design and experimental study of an in-situ indentation/scratch testing device with high load capacity for scanning electron microscope},
  journal = {Measurement Science and Technology},
  year = {2026},
  volume = {37},
  number = {16},
  pages = {166003},
  doi = {10.1088/1361-6501/ae526e}
}
Kostenlos starten →