EUVIMEDEUVIMED entdecken
Crossref

Intensity-based humidity sensor through surface etching of POF by femtosecond laser

Sadam Hussain, Abdul Ghaffar, Mujahid Mehdi, Abdulrahman M Alanazi, Ghalib Raza, Aftab Ahmed, Yanjun Hu, Sayed Hyder Abbas Musavi, Rui Ma, Moath Alathbah

Measurement Science and Technology · 16.01.2026 · 37 (2) · 025104

DOI: 10.1088/1361-6501/ae2d3f ↗

Kurz gefasst

Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 30.12.2025. Verfasst von Sadam Hussain und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: King Saud University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study proposes an optical fiber sensor for humidity measurement. The sensor fabrication utilizes a femtosecond laser to expose the fiber core region to specific dimensions. The fiber-exposed core section becomes sensitive to the surrounding environment. The humidity variations in the surroundings of the sensing zone have a greater influence on the optical power propagation in the fiber. As the humidity level increases, the accumulation of water vapor over the sensor section creates variable refractive index values between air and water. In the results, a variation in optical power intensity is noted at the sensor output. The obtained sensor response supports the sensor design for effectively measuring the humidity level from (20% to 80%) either in ascending or descending levels. The sensor, capable a withstanding 60% humidity variation, exhibits a significant sensitivity of 1.078 μW/%. The R 2 values for humidity level variation are found to be approximately 0.9878, indicating a very linear response. Furthermore, the sensor has a rapid time response of 0.1 s, enabling it to detect variations in humidity levels quickly. The sensor’s humidity measuring capability with significant sensitivity, linearity, and fast response is competing with existing traditional techniques of humidity measurement.

Förderung

  • King Saud University

Zitieren

APA

Hussain, S., Ghaffar, A., Mehdi, M., Alanazi, A. M., Raza, G., Ahmed, A., Hu, Y., Musavi, S. H. A., Ma, R., & Alathbah, M. (2026). Intensity-based humidity sensor through surface etching of POF by femtosecond laser. Measurement Science and Technology, 37(2), 025104. https://doi.org/10.1088/1361-6501/ae2d3f

Vancouver

Hussain S, Ghaffar A, Mehdi M, Alanazi AM, Raza G, Ahmed A, et al. Intensity-based humidity sensor through surface etching of POF by femtosecond laser. Measurement Science and Technology. 2026;37(2):025104. doi:10.1088/1361-6501/ae2d3f

BibTeX
@article{Hussain2026,
  author = {Hussain, Sadam and Ghaffar, Abdul and Mehdi, Mujahid and Alanazi, Abdulrahman M and Raza, Ghalib and Ahmed, Aftab and Hu, Yanjun and Musavi, Sayed Hyder Abbas and Ma, Rui and Alathbah, Moath},
  title = {Intensity-based humidity sensor through surface etching of POF by femtosecond laser},
  journal = {Measurement Science and Technology},
  year = {2026},
  volume = {37},
  number = {2},
  pages = {025104},
  doi = {10.1088/1361-6501/ae2d3f}
}
Kostenlos starten →