Enhancing RF MEMS SPDT switch performance through fabrication and ground balance
Journal of Micromechanics and Microengineering · 01.08.2026 · 36 (8) · 085013
DOI: 10.1088/1361-6439/ae96b8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 20.08.2026. Verfasst von Khushbu Singh Raghav und 7 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: ANRF-DST, India, CSIR, India, DoT, India and CSIR, India.
Abstract (Originalsprache)
Radio frequency microelectromechanical system switches are gaining attention as an alternative to solid-state switches due to their low loss, high isolation, and excellent linearity. Although many single-pole single-throw designs are reported in the literature, multiport switches, especially single-pole double-throw (SPDT) switches, remain limited despite their key role in phase shifters, antenna switching, and transceiver systems. In Coplanar Waveguide-based SPDT switches, residual stress in the beam and grounding effects strongly influence pull-in voltage, beam deformation, insertion loss, and isolation. This work presents the complete development of an SPDT switch from design to measurement. Short- and long-path layouts are evaluated, with the short path showing better return loss. A solid cantilever initially requires a high pull-in voltage, which is reduced by introducing two windows near the anchor and tip, resulting in better damping and more stable contact. The fabrication process is also optimised to mitigate stress in the switch. After fabrication, a high insertion loss is observed due to the absence of a common ground. To overcome this, double wire-bond ground bridges are implemented to equalise the grounds, significantly improving insertion loss and yielding smooth isolation across the 100 MHz–20 GHz range.
Förderung
- ANRF-DST, India
- CSIR, India
- DoT, India and CSIR, India
Zitieren
APA
Raghav, K. S., Kharbanda, D. K., Kumar, A., Jangir, B. S., Sharma, R. K., Tiwari, S., Mukhiya, R., & Bansal, D. (2026). Enhancing RF MEMS SPDT switch performance through fabrication and ground balance. Journal of Micromechanics and Microengineering, 36(8), 085013. https://doi.org/10.1088/1361-6439/ae96b8
Vancouver
Raghav KS, Kharbanda DK, Kumar A, Jangir BS, Sharma RK, Tiwari S, et al. Enhancing RF MEMS SPDT switch performance through fabrication and ground balance. Journal of Micromechanics and Microengineering. 2026;36(8):085013. doi:10.1088/1361-6439/ae96b8
BibTeX
@article{Raghav2026,
author = {Raghav, Khushbu Singh and Kharbanda, Dheeraj Kumar and Kumar, Amit and Jangir, Bhawani Shankar and Sharma, Rama Kant and Tiwari, Shivam and Mukhiya, Ravindra and Bansal, Deepak},
title = {Enhancing RF MEMS SPDT switch performance through fabrication and ground balance},
journal = {Journal of Micromechanics and Microengineering},
year = {2026},
volume = {36},
number = {8},
pages = {085013},
doi = {10.1088/1361-6439/ae96b8}
}
EUVIMED