EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Material selection and performance analysis of RF-MEMS switch for MM-WAVE applications

R. Karthick, S.P.K. Babu, B. Balaji

International Journal of Computational and Experimental Science and Engineering · 12.01.2025 · 11 (1)

DOI: 10.22399/ijcesen.737 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Computational and Experimental Science and Engineering, online erschienen am 12.01.2025. Verfasst von R. Karthick und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the design, simulation, and investigation of a fundamental structure for capacitive MEMS switches in a shunt configuration. The main objective is to select materials that achieve low actuation voltage while maintaining RF and dynamic performance, especially for mm-wave applications. The proposed design consists of a Fixed-Fixed flexure beam with dimensions of 260 μm in length, 100 μm in width, and 0.5 μm in thickness. Considering the impact of squeeze film, 60 holes are integrated into the beam membrane, each measuring 64 μm² (8µm x 8µm), and a final gap of 1.9 μm is implemented. The suitability of materials for the beam membrane and dielectric layer in capacitive MEMS switches has been thoroughly examined through a combination of theoretical analysis and software simulations. Aluminum (Al) has emerged as the ideal choice for the beam membrane in mm-wave applications. This preference is defensible by its simulated results to offer a low pull-in voltage of 4V, a quality factor of 1.18, and a switching time of 67 microseconds. Similarly, Si3N4 has been identified as appropriate material, offering a upstate capacitance of 91fF and a downstate capacitance of 7.1pF.

Zitieren

APA

Karthick, R., Babu, S., & Balaji, B. (2025). Material selection and performance analysis of RF-MEMS switch for MM-WAVE applications. International Journal of Computational and Experimental Science and Engineering, 11(1). https://doi.org/10.22399/ijcesen.737

Vancouver

Karthick R, Babu S, Balaji B. Material selection and performance analysis of RF-MEMS switch for MM-WAVE applications. International Journal of Computational and Experimental Science and Engineering. 2025;11(1). doi:10.22399/ijcesen.737

BibTeX
@article{Karthick2025,
  author = {Karthick, R. and Babu, S.P.K. and Balaji, B.},
  title = {Material selection and performance analysis of RF-MEMS switch for MM-WAVE applications},
  journal = {International Journal of Computational and Experimental Science and Engineering},
  year = {2025},
  volume = {11},
  number = {1},
  doi = {10.22399/ijcesen.737}
}
Kostenlos starten →