EUVIMEDEUVIMED entdecken
Crossref

Design and fabrication of micro-sensors for in-situ temperature and pressure monitoring in pyrotechnic devices

Jiahao Li, Xu Chen, Rencong Mu, Hao Wu, Meng Li, Xiaorong Guo, Mengxi Wu, Ruide Wu, Junshan Liu

Journal of Micromechanics and Microengineering · 01.08.2026 · 36 (8) · 085002

DOI: 10.1088/1361-6439/ae8e84 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 05.08.2026. Verfasst von Jiahao Li und 8 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Gefördert von: State Key Laboratory of Transient Chemical Effects and Control, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the reliability and intelligence of pyrotechnic devices, there is an urgent demand for real-time detection of their internal temperature and pressure. However, the extremely confined space inside pyrotechnic devices imposes stringent constraints that make the current sensors inadequate to be employed. In addition, the harsh environments and working conditions raise requirements for wide detection range. To address these challenges, we propose a miniaturised integrated temperature/high-pressure sensor with a dimension down to 1.2 × 1.5 × 0.8 mm that ensures in-situ monitoring of pyrotechnic devices. The sensor adopts a three-dimensional architecture featuring a vertical stack of pressure and temperature units, significantly reducing the lateral dimensions of the device. The piezoresistive pressure unit incorporates a square composite diaphragm equipped with a stress-amplifying membrane and a central support pillar, effectively enhancing the sensitivity of the pressure unit. Characterisation results demonstrate that within the ranges of 0–100 MPa and −60 °C–200 °C, our device exhibits a sensitivity of 2.19 mV MPa −1 and a sensitivity drift of 0.26% FS in terms of pressure, and a temperature coefficient of resistance of 2837.191 ppm °C −1 , with a sensitivity of 2.234 Ω °C −1 , accuracy of 0.054% FS. Combining the advantages of miniaturisation, high sensitivity, and a wide measurement range, this integrated sensor holds broad application prospects in fields such as blast wave detection, fault diagnosis of high-end equipment, and safety monitoring.

Förderung

  • State Key Laboratory of Transient Chemical Effects and Control, China

Zitieren

APA

Li, J., Chen, X., Mu, R., Wu, H., Li, M., Guo, X., Wu, M., Wu, R., & Liu, J. (2026). Design and fabrication of micro-sensors for in-situ temperature and pressure monitoring in pyrotechnic devices. Journal of Micromechanics and Microengineering, 36(8), 085002. https://doi.org/10.1088/1361-6439/ae8e84

Vancouver

Li J, Chen X, Mu R, Wu H, Li M, Guo X, et al. Design and fabrication of micro-sensors for in-situ temperature and pressure monitoring in pyrotechnic devices. Journal of Micromechanics and Microengineering. 2026;36(8):085002. doi:10.1088/1361-6439/ae8e84

BibTeX
@article{Li2026,
  author = {Li, Jiahao and Chen, Xu and Mu, Rencong and Wu, Hao and Li, Meng and Guo, Xiaorong and Wu, Mengxi and Wu, Ruide and Liu, Junshan},
  title = {Design and fabrication of micro-sensors for in-situ temperature and pressure monitoring in pyrotechnic devices},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2026},
  volume = {36},
  number = {8},
  pages = {085002},
  doi = {10.1088/1361-6439/ae8e84}
}
Kostenlos starten →