EUVIMEDEUVIMED entdecken
Crossref

Mechanical Structure Design of Pressure Sensors With Temperature Self-Compensation for Invasive Blood Pressure Monitoring

Lianqiao Zhou, Qinlan Li, Xinkai Xu, Shuang Wei, Shugang Wang, Jingqiang Cui, Guosheng Wang, Chong Liu, Yewang Su

Journal of Applied Mechanics · 01.11.2024 · 91 (11)

DOI: 10.1115/1.4066087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 21.08.2024. Verfasst von Lianqiao Zhou und 8 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Invasive blood pressure (IBP) is a fundamental part of basic cardiovascular monitoring. Conventional piezoresistive pressure sensors are limited in usage due to the high cost associated with equipment and intricate fabrication processes. Meanwhile, low-cost strain gauge pressure sensors have poor performance in the gauge factor (GF) and temperature insensitivity. Here, we report a mechanical structure design for diaphragm pressure sensors (DPSs) by introducing a compensation grid to overcome the aforementioned challenges. A simplified model is established to analyze the mechanical deformation and obtain the optimal design parameters of the diaphragm pressure sensor (DPS). By rationally arranging the placement of sensitive grids to eliminate the discrepancy of relative resistance changes within four arms of the Wheatstone full-bridge circuit, the appropriate GF and high-temperature insensitivity are simultaneously achieved. The blood pressure sensor with the DPS is then fabricated and characterized experimentally, which demonstrates an appropriate GF (ΔU/U0)/P=3.56×10−5kPa−1 and low-temperature coefficient of voltage (ΔU/U0)/ΔT=3.4×10−7∘C−1. The developed mechanical structure design offers valuable insights for other resistive pressure sensors to improve the GF and temperature insensitivity.

Zitieren

APA

Zhou, L., Li, Q., Xu, X., Wei, S., Wang, S., Cui, J., Wang, G., Liu, C., & Su, Y. (2024). Mechanical Structure Design of Pressure Sensors With Temperature Self-Compensation for Invasive Blood Pressure Monitoring. Journal of Applied Mechanics, 91(11). https://doi.org/10.1115/1.4066087

Vancouver

Zhou L, Li Q, Xu X, Wei S, Wang S, Cui J, et al. Mechanical Structure Design of Pressure Sensors With Temperature Self-Compensation for Invasive Blood Pressure Monitoring. Journal of Applied Mechanics. 2024;91(11). doi:10.1115/1.4066087

BibTeX
@article{Zhou2024,
  author = {Zhou, Lianqiao and Li, Qinlan and Xu, Xinkai and Wei, Shuang and Wang, Shugang and Cui, Jingqiang and Wang, Guosheng and Liu, Chong and Su, Yewang},
  title = {Mechanical Structure Design of Pressure Sensors With Temperature Self-Compensation for Invasive Blood Pressure Monitoring},
  journal = {Journal of Applied Mechanics},
  year = {2024},
  volume = {91},
  number = {11},
  doi = {10.1115/1.4066087}
}
Kostenlos starten →