Cost-effective fabrication of microfluidic systems by photopolymerization with 2-dimensional design using inverse mask
Journal of Micromechanics and Microengineering · 01.06.2026 · 36 (6) · 065001
DOI: 10.1088/1361-6439/ae7808 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 16.06.2026. Verfasst von Thiet Dinh Tran und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben.
Abstract (Originalsprache)
Microfluidic systems have emerged as powerful platforms for biomedical research, drug discovery, and chemical synthesis, yet their widespread adoption remains limited by the complexity and cost of fabrication. In this study, we introduce a cost‐effective and accessible method for fabricating microfluidic molds using photopolymerization with a two‐dimensional negative mask. Fabrication parameters, including ultraviolet exposure time and the distance between the light source and the mask, were systematically optimized. The optimal conditions—40 s of exposure at a 10 cm source‐to‐mask distance—minimized structural deformation and light diffraction, yielding features with sidewalls approaching 90°. Dimensional accuracy was confirmed across a range of channel widths, with 150 µ m identified as the minimum stable width for 400 µ m‐deep channels. Using these optimized parameters, an integrated microfluidic device capable of generating concentration gradients and supporting multi‐spheroid culture was successfully fabricated. The device demonstrated robust leakage resistance, reliable gradient formation, and the ability to sustain high‐viability HepG2 spheroids. Furthermore, drug testing with α ‐mangostin revealed dose‐dependent cytotoxic effects, validating the platform for high‐throughput drug screening. Overall, this method provides a simple, low‐cost, and precise approach for fabricating functional microfluidic devices, with broad applicability in both fundamental research and biomedical applications.
Zitieren
APA
Tran, T. D., Nguyen, Q. T., Pham, N. T. T., Nguyen, X. T., Nguyen, D. T., & Tran, L. D. (2026). Cost-effective fabrication of microfluidic systems by photopolymerization with 2-dimensional design using inverse mask. Journal of Micromechanics and Microengineering, 36(6), 065001. https://doi.org/10.1088/1361-6439/ae7808
Vancouver
Tran TD, Nguyen QT, Pham NTT, Nguyen XT, Nguyen DT, Tran LD. Cost-effective fabrication of microfluidic systems by photopolymerization with 2-dimensional design using inverse mask. Journal of Micromechanics and Microengineering. 2026;36(6):065001. doi:10.1088/1361-6439/ae7808
BibTeX
@article{Tran2026,
author = {Tran, Thiet Dinh and Nguyen, Quan Truong and Pham, Nhan Thi Thanh and Nguyen, Xuyen Thi and Nguyen, Duong Thanh and Tran, Lam Dai},
title = {Cost-effective fabrication of microfluidic systems by photopolymerization with 2-dimensional design using inverse mask},
journal = {Journal of Micromechanics and Microengineering},
year = {2026},
volume = {36},
number = {6},
pages = {065001},
doi = {10.1088/1361-6439/ae7808}
}
EUVIMED