EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parameter Optimization for High-Resolution Microfluidic Channel Fabrication Using a Commercial Low-Cost MSLA Printer

Jintao Liu iD, Jiadong Ma, Jaeseon Kim, Juyeol Bae iD

Micromachines · 11.02.2026 · 17 (2) · 236

DOI: 10.3390/mi17020236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 11.02.2026. Verfasst von Jintao Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Chonnam National University, Korea government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vat polymerization-based 3D printing has emerged as a promising approach for the rapid, low-cost, and scalable fabrication of microfluidic devices; however, achieving high-resolution and fully clog-free microchannels using commercial resins remains challenging. In this study, we systematically investigate key printing parameters—including channel orientation, length, layer thickness, and exposure time—to elucidate their effects on channel openness, dimensional fidelity, and surface morphology using a commercially available low-cost masked stereolithography (MSLA) printer and printing resin, thereby establishing quantitative fabrication boundaries that define the transition from fully open to blocked microchannels in practice. Under optimized printing conditions, microchannels with characteristic dimensions exceeding 200 µm were fabricated in a reliable and clog-free manner using standard commercial resins. In addition, by implementing a size-compensated design strategy, we achieved the fabrication of complex droplet generator arrays with a minimum central channel width of 400 µm, while maintaining an internal dimensional deviation below 2.5%. These investigations significantly expand the practical applicability of low-cost MSLA 3D printing for microfluidic device fabrication, providing a scalable and accessible pathway for producing high-fidelity microchannels without reliance on custom resins or post-processing-intensive workflows.

Schlagwörter

Stichwörter der Autor:innen

3D microfluidics3D printingmicrofluidic design rules

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea.

ORCID-Profile: Jintao Liu, Juyeol Bae

Förderung

  • National Research Foundation of Korea
  • Chonnam National University
  • Korea government

Zitieren

APA

Liu, J., Ma, J., Kim, J., & Bae, J. (2026). Parameter Optimization for High-Resolution Microfluidic Channel Fabrication Using a Commercial Low-Cost MSLA Printer. Micromachines, 17(2), 236. https://doi.org/10.3390/mi17020236

Vancouver

Liu J, Ma J, Kim J, Bae J. Parameter Optimization for High-Resolution Microfluidic Channel Fabrication Using a Commercial Low-Cost MSLA Printer. Micromachines. 2026;17(2):236. doi:10.3390/mi17020236

BibTeX
@article{Liu2026,
  author = {Liu, Jintao and Ma, Jiadong and Kim, Jaeseon and Bae, Juyeol},
  title = {Parameter Optimization for High-Resolution Microfluidic Channel Fabrication Using a Commercial Low-Cost MSLA Printer},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {236},
  doi = {10.3390/mi17020236}
}
Kostenlos starten →