EUVIMEDEUVIMED entdecken
Crossref

The effects of contact configuration and coating morphology on the tribological behaviour of tetrahedral amorphous diamond-like carbon (ta-C DLC) coatings under boundary lubrication

Tanmaya Mishra, Björn Nordin, Daniel Svanbäck, Sanna Tervakangas, Braham Prakash

Tribology - Materials, Surfaces & Interfaces · 03.04.2019 · 13 (2) · 120-129

DOI: 10.1080/17515831.2019.1596627 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribology - Materials, Surfaces & Interfaces, online erschienen am 27.03.2019. Verfasst von Tanmaya Mishra und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tribological studies were carried out with tetrahedral amorphous diamond-like carbon (ta-C DLC) coatings, varying in thickness and roughness, using two different contact configurations lubricated with seven types of hydraulic oils. Tribopair of cast iron and ta-C coated steel were tested in both non-conformal and conformal, unidirectional sliding contacts. The friction and wear results were mainly affected by the thickness of the coating in the non-conformal contact and the surface roughness of the coating in the conformal contact. Tests done with mineral base oil containing rust inhibitor in the non-conformal contact and with Polyalphaolefins and synthetic ester base oils in the conformal contact resulted in the lowest friction while that with mineral base oil containing zinc resulted in high friction and counterface wear. The results highlight the interdependence of contact configuration, lubricant chemistry, coating's surface morphology and coating's thickness in determining the tribological behaviour of ta-C coatings under boundary lubrication.

Zitieren

APA

Mishra, T., Nordin, B., Svanbäck, D., Tervakangas, S., & Prakash, B. (2019). The effects of contact configuration and coating morphology on the tribological behaviour of tetrahedral amorphous diamond-like carbon (ta-C DLC) coatings under boundary lubrication. Tribology - Materials, Surfaces & Interfaces, 13(2), 120-129. https://doi.org/10.1080/17515831.2019.1596627

Vancouver

Mishra T, Nordin B, Svanbäck D, Tervakangas S, Prakash B. The effects of contact configuration and coating morphology on the tribological behaviour of tetrahedral amorphous diamond-like carbon (ta-C DLC) coatings under boundary lubrication. Tribology - Materials, Surfaces & Interfaces. 2019;13(2):120-129. doi:10.1080/17515831.2019.1596627

BibTeX
@article{Mishra2019,
  author = {Mishra, Tanmaya and Nordin, Björn and Svanbäck, Daniel and Tervakangas, Sanna and Prakash, Braham},
  title = {The effects of contact configuration and coating morphology on the tribological behaviour of tetrahedral amorphous diamond-like carbon (ta-C DLC) coatings under boundary lubrication},
  journal = {Tribology - Materials, Surfaces & Interfaces},
  year = {2019},
  volume = {13},
  number = {2},
  pages = {120--129},
  doi = {10.1080/17515831.2019.1596627}
}
Kostenlos starten →