EUVIMEDEUVIMED entdecken
Crossref

Reusing flowback for remote hydraulic fracturing: iron control and gel compatibility at Carpentaria-5H, Beetaloo Sub-basin

Toseef Ahmad, Jon Bennett, Kelvin Wuttke

Australian Energy Producers Journal · 14.05.2026 · 66 (1)

DOI: 10.1071/ep25242 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Australian Energy Producers Journal, online erschienen am 14.05.2026. Verfasst von Toseef Ahmad und 2 weiteren Autor:innen. Die Arbeit nennt 4 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carpentaria-5H in the Beetaloo Sub-basin (Northern Territory, Australia) set a national benchmark for hydraulic fracturing volumes while operating in a highly remote location. Some water for this stimulation was reused from flow testing of nearby wells, stored in large onsite tanks. For large Northern Territory campaigns, this practice reduces aquifer extraction, disposal cost, and concentrated brine waste while addressing stored fluid management. The challenge was quality: untreated flowback water often cannot serve as a base fluid. In this case, high dissolved iron (~150 ppm) risked fisheyes and reduced slickwater gel performance, making treatment essential before reuse. Accordingly, about 4.5 ML of stored flowback water was treated and reused as part of the frac base fluid. A field-deployable treatment train combining oxidation, pH control, circulation, settling, and multi-stage media filtration reduced iron to <10 ppm and restored fluid performance. Treated water supported high-rate operations (>105 bbl/min and five to six stages per day). Pre- and post-treatment water quality and the operating envelopes that drove treatment time are presented. Benefits included reduced freshwater extraction, added onsite fluid capacity, and improved cost and health, safety, and environment outcomes. Limitations included lead time, quality assurance/quality control to prevent re-oxidation, power and footprint requirements, sludge handling, and routine monitoring. This workflow demonstrates how fit-for-purpose flowback reuse with iron control can de-risk large hydraulic fracturing campaigns in remote Australian basins, where reuse is increasingly essential.

Zitieren

APA

Ahmad, T., Bennett, J., & Wuttke, K. (2026). Reusing flowback for remote hydraulic fracturing: iron control and gel compatibility at Carpentaria-5H, Beetaloo Sub-basin. Australian Energy Producers Journal, 66(1). https://doi.org/10.1071/ep25242

Vancouver

Ahmad T, Bennett J, Wuttke K. Reusing flowback for remote hydraulic fracturing: iron control and gel compatibility at Carpentaria-5H, Beetaloo Sub-basin. Australian Energy Producers Journal. 2026;66(1). doi:10.1071/ep25242

BibTeX
@article{Ahmad2026,
  author = {Ahmad, Toseef and Bennett, Jon and Wuttke, Kelvin},
  title = {Reusing flowback for remote hydraulic fracturing: iron control and gel compatibility at Carpentaria-5H, Beetaloo Sub-basin},
  journal = {Australian Energy Producers Journal},
  year = {2026},
  volume = {66},
  number = {1},
  doi = {10.1071/ep25242}
}
Kostenlos starten →