Optimization of Hydraulic Fracturing Modeling on The Proppant Flowback Issue Well DF-007
Journal of Earth Energy Science, Engineering, and Technology · 04.03.2026 · 8 (3) · 99-106
DOI: 10.25105/dkvxbf52 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Earth Energy Science, Engineering, and Technology, online erschienen am 04.03.2026. Verfasst von Fanata Yudha Nugraha und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Well DF-007, Field IA, Talang Akar Formation has low permeability that hinders well productivity. To improve production performance, hydraulic fracturing operations need to be conducted on the well. However, after the operation, a proppant flowback problem was discovered when the well was put back into production. This issue disrupts production performance and causes proppant accumulation. This problem indicates the need for a comprehensive analysis of the factors leading to proppant flowback issues, before determining a solution that addresses the root cause of the problem. The research flow begins with analyzing the factors causing proppant flowback issues such as initial production management settings, mechanical, and hydrodynamic force factors. After identifying the main issue, which is the hydrodynamic force factor, the process continues to the re-modeling stage by selecting proppants and fracturing fluids. The solution is determined by selecting the YF135.1HTD fracturing fluid with high viscosity to optimize proppant transportation, as well as choosing a combination of conventional proppants and adding resin-coated or rod-shaped proppants in the final stage to strengthen the stability of the proppant layer. The evaluation results show that the use of a combination of the fracturing fluid YF135.1HTD and the proppants BorProp 16/20 (Ceramic) + 16/20 XRT Ceramax I (Resin Coated Ceramic) can increase the average formation permeability from 5.33 mD to 181 mD, skin factor from +11.65 (damaged) to -6.03 (stimulated), fold of increase (FOI) of 8.21 times, as well as an increase in the gross rate on the inflow performance relationship (IPR) from previously 88 BFPD to 880 BFPD.
Zitieren
APA
Nugraha, F. Y., Cahyaningtyas, N., Addin, D. I., Tony, B., & Nandiwardhana, D. (2026). Optimization of Hydraulic Fracturing Modeling on The Proppant Flowback Issue Well DF-007. Journal of Earth Energy Science, Engineering, and Technology, 8(3), 99-106. https://doi.org/10.25105/dkvxbf52
Vancouver
Nugraha FY, Cahyaningtyas N, Addin DI, Tony B, Nandiwardhana D. Optimization of Hydraulic Fracturing Modeling on The Proppant Flowback Issue Well DF-007. Journal of Earth Energy Science, Engineering, and Technology. 2026;8(3):99-106. doi:10.25105/dkvxbf52
BibTeX
@article{Nugraha2026,
author = {Nugraha, Fanata Yudha and Cahyaningtyas, Ndaru and Addin, Dhaffa Izuddin and Tony, Brian and Nandiwardhana, Damar},
title = {Optimization of Hydraulic Fracturing Modeling on The Proppant Flowback Issue Well DF-007},
journal = {Journal of Earth Energy Science, Engineering, and Technology},
year = {2026},
volume = {8},
number = {3},
pages = {99--106},
doi = {10.25105/dkvxbf52}
}
EUVIMED