Properties and antifouling performance of fabricated polymers containing copper thiocyanate
Australian Journal of Chemistry · 13.02.2025 · 78 (2)
DOI: 10.1071/ch24162 ↗Kurz gefasst
Fachartikel in der Zeitschrift Australian Journal of Chemistry, online erschienen am 31.01.2025. Verfasst von Krishnamurthy Prasad und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Defence Science Institute.
Abstract (Originalsprache)
Fouling of subsurface structures by micro and macro-organisms is a centuries-old problem that can be better managed by the use of multi-functional materials and modern fabrication techniques. Copper(I) thiocyanate, or CuTC, is a common coordination polymer that reduces the adherence and growth of marine organisms on underwater surfaces used as a paint additive. Test samples of polymers that contained up to 20% (w/w) CuTC were fabricated using two methods: a two-part epoxy system, cast into moulds and cured at room temperature; and stereolithography, a 3-D printing technique that uses UV light to set designs additively manufactured from a single part urethane resin. Fabricated materials were extensively characterised by advanced X-ray diffraction (XRD), scanning electron microscopy (SEM) and polarised synchrotron Fourier transform infrared (S-FTIR) microspectroscopy, which together revealed distinct molecular networking structures within the added chemical biocide that depended on the manufacturing method used. Performance was tested over a 3-month deployment, which showed marked differences in the effectiveness of the fabricated material types in resisting fouling by aquatic organisms in a static estuarine environment. These differences are attributable to distinct physical and chemical properties of the test materials imparted upon them by the fabrication method, all of which are areas for further investigation in the development of manufactured fouling-resistant polymers for use in marine environments.
Förderung
- Defence Science Institute
Zitieren
APA
Prasad, K., Piola, R. F., Vongsvivut, J., Khan, H., Molino, P. J., Hare, D. J., Salim, N. V., & Hameed, N. (2025). Properties and antifouling performance of fabricated polymers containing copper thiocyanate. Australian Journal of Chemistry, 78(2). https://doi.org/10.1071/ch24162
Vancouver
Prasad K, Piola RF, Vongsvivut J, Khan H, Molino PJ, Hare DJ, et al. Properties and antifouling performance of fabricated polymers containing copper thiocyanate. Australian Journal of Chemistry. 2025;78(2). doi:10.1071/ch24162
BibTeX
@article{Prasad2025,
author = {Prasad, Krishnamurthy and Piola, Richard F. and Vongsvivut, Jitraporn and Khan, Hareem and Molino, Paul J. and Hare, Dominic J. and Salim, Nisa V. and Hameed, Nishar},
title = {Properties and antifouling performance of fabricated polymers containing copper thiocyanate},
journal = {Australian Journal of Chemistry},
year = {2025},
volume = {78},
number = {2},
doi = {10.1071/ch24162}
}
EUVIMED