EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Anticorrosion and Antifouling Properties of a Cu-Doped TiO2 Coating Fabricated via Micro-Arc Oxidation

Pengfei Hu, Liyang Zhu, Chenghuan Tian, Gege Xu, Xinxin Zhang, Guangyi Cai iD

Materials · 30.12.2023 · 17 (1) · 217

DOI: 10.3390/ma17010217 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.12.2023. Verfasst von Pengfei Hu und 5 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan 430033, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a promising material for petroleum industrial applications, titanium (Ti) and its alloys receive wide attention due to their outstanding physicochemical properties. However, the harsh industrial environment requires an antifouling surface with a desired corrosion resistance for Ti and its alloys. In order to achieve the desired antifouling properties, micro-arc oxidation (MAO) was used to prepare a Cu-doped TiO2 coating. The microstructure of the Cu-doped TiO2 coating was investigated by TF-XRD, SEM, and other characterization techniques, and its antifouling and anticorrosion properties were also tested. The results show the effects of the incorporation of Cu (~1.73 wt.%) into TiO2 to form a Cu-doped TiO2, namely, a Ti–Cu coating. The porosity (~4.8%) and average pore size (~0.42 μm) of the Ti–Cu coating are smaller than the porosity (~5.6%) and average pore size (~0.66 μm) of Ti–blank coating. In addition, there is a significant reduction in the amount of SRB adhesion on the Ti–Cu coating compared to the Ti–blank coating under the same conditions, while there is little difference in corrosion resistance between the two coatings. There, the addition of copper helps to improve the fouling resistance of TiO2 coatings without compromising their corrosion resistance. Our work provides a practical method to improve the antifouling function of metallic Ti substrates, which could promote the application of Ti in the petroleum industry.

Schlagwörter

Stichwörter der Autor:innen

Cu incorporationanticorrosionantifoulingmicro-arc oxidationtitanium

Autor:innen und Institutionen

  • National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan 430033, China.
  • East Lake Laboratory, Wuhan 420202, China.
  • Hubei Key Laboratory of Material Chemistry and Service Failure, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.

ORCID-Profile: Guangyi Cai

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Hu, P., Zhu, L., Tian, C., Xu, G., Zhang, X., & Cai, G. (2023). Study of Anticorrosion and Antifouling Properties of a Cu-Doped TiO2 Coating Fabricated via Micro-Arc Oxidation. Materials, 17(1), 217. https://doi.org/10.3390/ma17010217

Vancouver

Hu P, Zhu L, Tian C, Xu G, Zhang X, Cai G. Study of Anticorrosion and Antifouling Properties of a Cu-Doped TiO2 Coating Fabricated via Micro-Arc Oxidation. Materials. 2023;17(1):217. doi:10.3390/ma17010217

BibTeX
@article{Hu2023,
  author = {Hu, Pengfei and Zhu, Liyang and Tian, Chenghuan and Xu, Gege and Zhang, Xinxin and Cai, Guangyi},
  title = {Study of Anticorrosion and Antifouling Properties of a Cu-Doped TiO2 Coating Fabricated via Micro-Arc Oxidation},
  journal = {Materials},
  year = {2023},
  volume = {17},
  number = {1},
  pages = {217},
  doi = {10.3390/ma17010217}
}
Kostenlos starten →