Wide-operating-range propulsive performance and wake kinetic-energy transport of a ship propulsor incorporating a pre-duct and propeller boss cap fins
Physics of Fluids · 01.11.2026 · 38 (11)
DOI: 10.1063/5.0357096 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 03.11.2026. Verfasst von Xin Chang und 5 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Because the propeller advance coefficient varies widely during ship operation, this study numerically investigates the propulsive performance and wake kinetic-energy transport of an integrated propulsor combining a pre-duct with propeller boss cap fins (PBCF) over J = 0.30–1.10. The bare-propeller, PBCF, pre-duct, and integrated configurations were compared. Axial and circumferential resolved mean-flow kinetic-energy fluxes were evaluated over full-wake and near-hub regions, and the combined response was compared with an additive reference derived from the isolated-device responses. The integrated configuration increased the prescribed-inflow thrust–power ratio by 1.67%–6.29%, with the maximum at J = 0.745. Near the design condition, both flux responses remained close to the additive reference. At J = 1.10, only 6%–45% of the axial-flux increase and 15%–20% of the referenced circumferential-flux reduction were retained. The small design-condition deviation resulted mainly from cancelation between positive and negative local responses. At J = 1.10, the negative axial deviation was maintained mainly by the outer slipstream, whereas the positive circumferential deviation arose jointly from the near-hub and outer regions and persisted downstream mainly through the outer region. These results suggest that the pre-duct-modified inflow and propeller wake alter the local flow environment experienced by the PBCF. The attack angle produced the largest parameter-response ranges, reaching about 11.5% and 17% points for thrust–power ratio and axial flux, respectively, at J = 1.10. An outlet-diameter ratio of Dd/Dd,0=0.9 achieves the highest equal-weight score (about 0.70) and is identified as the most balanced candidate within the investigated numerical design space.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Chang, X., Chen, Q., Lu, Y., Zhu, Z., Chen, C., & Zhang, X. (2026). Wide-operating-range propulsive performance and wake kinetic-energy transport of a ship propulsor incorporating a pre-duct and propeller boss cap fins. Physics of Fluids, 38(11). https://doi.org/10.1063/5.0357096
Vancouver
Chang X, Chen Q, Lu Y, Zhu Z, Chen C, Zhang X. Wide-operating-range propulsive performance and wake kinetic-energy transport of a ship propulsor incorporating a pre-duct and propeller boss cap fins. Physics of Fluids. 2026;38(11). doi:10.1063/5.0357096
BibTeX
@article{Chang2026,
author = {Chang, Xin and Chen, Qiuying and Lu, Yu and Zhu, Zhengyu and Chen, Cheng and Zhang, Xiuyuan},
title = {Wide-operating-range propulsive performance and wake kinetic-energy transport of a ship propulsor incorporating a pre-duct and propeller boss cap fins},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {11},
doi = {10.1063/5.0357096}
}
EUVIMED