EUVIMEDEUVIMED entdecken
Crossref

Numerical investigation of the wake-control mechanisms and pre-duct parameter sensitivity in a ship propulsor with propeller boss cap fins

Xin Chang, Qiuying Chen, Yu Lu, Zhengyu Zhu

Physics of Fluids · 01.07.2026 · 38 (7)

DOI: 10.1063/5.0342466 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 27.07.2026. Verfasst von Xin Chang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The wake behind a single-screw ship contains both non-uniform axial momentum and near-hub swirl-related kinetic-energy loss. This study investigates a combined pre-duct and propeller boss cap fins (PBCF) configuration using unsteady Reynolds-averaged Navier–Stokes simulations coupled with the volume-of-fluid method and a sliding-mesh approach. A local wake-energy diagnostic framework is established by coupling axial momentum utilization, circumferential kinetic-energy proportion, non-axial kinetic-energy density, and positive-contribution statistics. Based on this framework, the complementary interaction between the duct-induced axial momentum enhancement and PBCF-induced near-hub swirl attenuation is clarified, and the sensitivity of the duct outlet diameter, chord length, axial position, and duct angle of attack is quantitatively ranked. The Duct-PBCF configuration increases the near-hub axial momentum utilization by approximately 9.1% and 5.0% at sections S2 and S3, respectively, compared with the bare propeller. It also reduces the circumferential kinetic-energy proportion by about 14.96% at S2 compared with the duct-only configuration. Among the duct parameters, the overall sensitivity follows A > D > X > L, with normalized weights of 0.36, 0.28, 0.21, and 0.14, respectively. Within the tested range, Dd/Dd,0 = 0.9 yields the largest efficiency improvement of approximately 3.2%, whereas a moderately positive duct angle of attack improves the thrust–torque balance. These results indicate that the Duct-PBCF design should be formulated as a multi-objective matching problem rather than as the optimization of a single performance index, involving propulsive performance, axial momentum enhancement, and vortex-energy reduction.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Chang, X., Chen, Q., Lu, Y., & Zhu, Z. (2026). Numerical investigation of the wake-control mechanisms and pre-duct parameter sensitivity in a ship propulsor with propeller boss cap fins. Physics of Fluids, 38(7). https://doi.org/10.1063/5.0342466

Vancouver

Chang X, Chen Q, Lu Y, Zhu Z. Numerical investigation of the wake-control mechanisms and pre-duct parameter sensitivity in a ship propulsor with propeller boss cap fins. Physics of Fluids. 2026;38(7). doi:10.1063/5.0342466

BibTeX
@article{Chang2026,
  author = {Chang, Xin and Chen, Qiuying and Lu, Yu and Zhu, Zhengyu},
  title = {Numerical investigation of the wake-control mechanisms and pre-duct parameter sensitivity in a ship propulsor with propeller boss cap fins},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {7},
  doi = {10.1063/5.0342466}
}
Kostenlos starten →