EUVIMEDEUVIMED entdecken
Crossref

Multi-axis diamond anvil cell (MDAC) as a triaxial deformation apparatus for high pressure studies

Guoyin Shen iD, Scott Ambos iD, Jesse S Smith iD, Dean Smith iD, Tyler Eastmond iD, Changyong Park iD, Curtis Kenney-Benson iD, Eric Rod iD, Lowell Miyagi iD

Review of Scientific Instruments · 01.11.2026 · 97 (11)

DOI: 10.1063/5.0349312 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 02.11.2026. Verfasst von Guoyin Shen und 8 weiteren Autor:innen. Beteiligte Einrichtung: HPCAT, X-ray Science Division, Argonne National Laboratory, Lemont, Illinois 60439, USA. Die Arbeit nennt 39 Literaturangaben. Gefördert von: U.S. Department of Energy—NNSA, U.S. Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We describe the use of a multi-axis diamond anvil cell (MDAC) as a triaxial deformation apparatus for high-pressure studies with in situ synchrotron x-ray diagnostics. The MDAC employs six independently driven diamond anvils in a cubic geometry, enabling near-uniform compression to high pressures followed by controlled differential loading along orthogonal axes. This architecture largely decouples pressure generation from deviatoric stress application—a persistent limitation of conventional diamond anvil cells (DACs)—and provides independent control of the stress path. We present the experimental methodology, including lattice-strain analysis adapted for the MDAC geometry, sample-strain measurement using combined encoder readings and x-ray radiography, texture analysis, and detector calibration for modular area detectors. The capabilities of the device are demonstrated through deformation experiments on polycrystalline MgO at ∼12 GPa. The MDAC preserves a nearly texture-free sample state during initial near-uniform compression and resolves the onset of lattice preferred orientation development, lattice-strain reflection ordering and its reversal upon yielding, and subsequent plastic evolution. Comparison with results from deformation-DIA and conventional DAC experiments in the literature indicates that the MDAC can access deformation states that are difficult to isolate in existing devices. The instrument is applicable to a broad range of materials that require controlled multi-axis stress states at high pressure and simultaneous structural and textural characterization.

Autor:innen und Institutionen

  • HPCAT, X-ray Science Division, Argonne National Laboratory, Lemont, Illinois 60439, USA.
  • Department of Geology and Geophysics, University of Utah, Salt Lake City, Utah 84112, USA.

ORCID-Profile: Guoyin Shen, Scott Ambos, Jesse S Smith, Dean Smith, Tyler Eastmond, Changyong Park, Curtis Kenney-Benson, Eric Rod, Lowell Miyagi

Förderung

  • U.S. Department of Energy—NNSA
  • U.S. Department of Energy

Zitieren

APA

Shen, G., Ambos, S., Smith, J. S., Smith, D., Eastmond, T., Park, C., Kenney-Benson, C., Rod, E., & Miyagi, L. (2026). Multi-axis diamond anvil cell (MDAC) as a triaxial deformation apparatus for high pressure studies. Review of Scientific Instruments, 97(11). https://doi.org/10.1063/5.0349312

Vancouver

Shen G, Ambos S, Smith JS, Smith D, Eastmond T, Park C, et al. Multi-axis diamond anvil cell (MDAC) as a triaxial deformation apparatus for high pressure studies. Review of Scientific Instruments. 2026;97(11). doi:10.1063/5.0349312

BibTeX
@article{Shen2026,
  author = {Shen, Guoyin and Ambos, Scott and Smith, Jesse S and Smith, Dean and Eastmond, Tyler and Park, Changyong and Kenney-Benson, Curtis and Rod, Eric and Miyagi, Lowell},
  title = {Multi-axis diamond anvil cell (MDAC) as a triaxial deformation apparatus for high pressure studies},
  journal = {Review of Scientific Instruments},
  year = {2026},
  volume = {97},
  number = {11},
  doi = {10.1063/5.0349312}
}
Kostenlos starten →