EUVIMEDObjevte EUVIMED
Crossref

Amphiphilic polymer control of rheology and filtration in high-temperature saline drilling fluids

Yiran Wang, Jinhua Huo, Yanzhe Su, Hao Zhang, Long Li

Physics of Fluids · 2026-08-01 · 38 (8)

DOI: 10.1063/5.0346746 ↗

At a glance

Journal article in Physics of Fluids, published online on 2026-08-21. Written by Yiran Wang and 4 co-authors. 34 references. Funded by: Shaanxi Provincial Education Department.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

During deep and ultra-deep drilling, water-based drilling fluids (WBDFs) are frequently exposed to high-temperature and high-salinity environments, which can exert adverse impacts on the aggregation state of clay particles, rheological response, and filtration performance. In this work, a salt- and temperature-resistant amphiphilic polymeric filtrate reducer (poly-IADS) was synthesized by using itaconic acid (IA), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), dimethyl diallyl ammonium chloride (DMDAAC), and sodium p-styrene sulfonate (SSS) to regulate the microstructure, rheology, and filtration behavior of bentonite-based drilling fluids. The chemical structure, molecular weight distribution, and thermal stability of poly-IADS were characterized, and its influences on the operational American Petroleum Institute (API) rheological parameters and API filtration loss (FLAPI) of bentonite-based drilling fluids under saline and high-temperature conditions were systematically evaluated. Over the investigated NaCl concentration range of 0–30 wt. %, the FLAPI of WBDF + poly-IADS increased from 6.04 to 14.98 ml, whereas that of WBDF + polyanionic cellulose (PAC) increased from 9.24 to 35.18 ml. After aging at 180 °C for 16 h, the FLAPI of polymer-based slurry (PBS) + poly-IADS was 9.20 ml, which was lower than those of PBS + PAC and the PBS blank under the same conditions. Zeta potential and particle size measurements indicated changes in the electrokinetic environment and particle size distribution of the suspensions. Adsorption measurements directly demonstrated the adsorption of poly-IADS onto bentonite particles. Taken together, the results are consistent with a filtration control mechanism involving polymer adsorption, clay particle aggregation, and filter cake formation.

Funding

  • Shaanxi Provincial Education Department

Cite

APA

Wang, Y., Huo, J., Su, Y., Zhang, H., & Li, L. (2026). Amphiphilic polymer control of rheology and filtration in high-temperature saline drilling fluids. Physics of Fluids, 38(8). https://doi.org/10.1063/5.0346746

Vancouver

Wang Y, Huo J, Su Y, Zhang H, Li L. Amphiphilic polymer control of rheology and filtration in high-temperature saline drilling fluids. Physics of Fluids. 2026;38(8). doi:10.1063/5.0346746

BibTeX
@article{Wang2026,
  author = {Wang, Yiran and Huo, Jinhua and Su, Yanzhe and Zhang, Hao and Li, Long},
  title = {Amphiphilic polymer control of rheology and filtration in high-temperature saline drilling fluids},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {8},
  doi = {10.1063/5.0346746}
}
Start for free →