EUVIMEDEUVIMED entdecken
Crossref

Modeling slag infiltration and initial solidification in an oscillating slab mold

Zhengchao Huang, Fei Gao, Qing Fang, Cheng Jiao, Meijie Zhang, Jianhao Wang, Hua Zhang

Physics of Fluids · 01.08.2026 · 38 (8)

DOI: 10.1063/5.0345282 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 06.08.2026. Verfasst von Zhengchao Huang und 6 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Science and Technology Research Project of Education Department of Hubei Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The slag infiltration and initial solidification of molten steel during the continuous casting process directly affect the surface quality of the cast slab and stable production operation. A transient three-dimensional mathematical model coupled with turbulence, multiphase flow and solidification was developed to systematically investigate how mold oscillation parameters and liquid slag viscosity affect the temperature distribution within the slag channel, slag infiltration velocity, and the growth of the initial solidified shell. The results show that the slag temperature in the slag channel gradually decreases from top to bottom. At the same height, from the center of the wide and narrow faces toward the corner, the temperature of the slag gradually decreases. The slag infiltration velocity is the highest at the corner and decreases gradually with increasing distance from the corner. When the oscillation frequency increases from 140 cycles per minute (cpm) to 160 cpm and the oscillation amplitude increases from 2.5 to 3 mm, the average slag infiltration velocity and temperature in the wide and narrow face regions of the mold gradually increase, and the average slag infiltration velocity of the narrow surface increases by 1.9 × 10−4 and 8 × 10−5 m/s, respectively. When the viscosity of liquid slag increases from 0.20 to 0.32 Pa s, the average slag infiltration velocity and the thickness of the initial solidified shell decrease slightly, and the maximum average slag infiltration velocity at the narrow surface decreases by 3.5 × 10−4 m/s, and the thickness of the maximum initial solidified shell is reduced by 0.144 mm.

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Research Project of Education Department of Hubei Province

Zitieren

APA

Huang, Z., Gao, F., Fang, Q., Jiao, C., Zhang, M., Wang, J., & Zhang, H. (2026). Modeling slag infiltration and initial solidification in an oscillating slab mold. Physics of Fluids, 38(8). https://doi.org/10.1063/5.0345282

Vancouver

Huang Z, Gao F, Fang Q, Jiao C, Zhang M, Wang J, et al. Modeling slag infiltration and initial solidification in an oscillating slab mold. Physics of Fluids. 2026;38(8). doi:10.1063/5.0345282

BibTeX
@article{Huang2026,
  author = {Huang, Zhengchao and Gao, Fei and Fang, Qing and Jiao, Cheng and Zhang, Meijie and Wang, Jianhao and Zhang, Hua},
  title = {Modeling slag infiltration and initial solidification in an oscillating slab mold},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {8},
  doi = {10.1063/5.0345282}
}
Kostenlos starten →