EUVIMEDEUVIMED entdecken
Crossref

Effect of Solidification Coupling and Submerged Entry Nozzle Port Design on Slag Entrainment in a Slab Continuous‐Casting Mold

Lianyou Zhang, Qin Liu, Rui Guan, Tianyu Ai, Chao Wang, Xingang Ai, Shengli Li

steel research international · 07.07.2026

DOI: 10.1002/srin.70587 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 07.07.2026. Verfasst von Lianyou Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A three‐dimensional multiphysics model coupling large eddy simulation (LES), volume of fluid (VOF) multiphase flow, and solidification was developed to investigate slag entrainment in a slab continuous‐casting mold. The mold‐wall heat flux was prescribed using user‐defined functions (UDFs), and the model was validated against in‐plant meniscus velocities measured by the nail‐board method. Based on the captured steel–slag–gas interfacial evolution, three dominant entrainment mechanisms were identified, including shear‐induced interfacial instability, von Kármán vortex‐induced suction, and meniscus fluctuation‐driven entrainment. Compared with simulations without solidification, the formation of the solidified shell significantly attenuates the postimpingement upward backflow, reducing the peak time‐averaged meniscus velocity from 0.20 to 0.15–0.16 m/s, indicating that neglecting solidification can overestimate near‐meniscus kinetic energy and bias slag‐entrainment risk assessment. Furthermore, the effect of submerged entry nozzle (SEN) port design was evaluated by comparing two‐port and three‐port nozzles, showing that the three‐port nozzle disperses jet momentum and stabilizes meniscus fluctuations, decreasing the minimum variance of level fluctuations to 0.21 mm 2 and reducing the net slag entrainment rate from 0.00504 to 0.00447 kg/s.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, L., Liu, Q., Guan, R., Ai, T., Wang, C., Ai, X., & Li, S. (2026). Effect of Solidification Coupling and Submerged Entry Nozzle Port Design on Slag Entrainment in a Slab Continuous‐Casting Mold. steel research international. https://doi.org/10.1002/srin.70587

Vancouver

Zhang L, Liu Q, Guan R, Ai T, Wang C, Ai X, et al. Effect of Solidification Coupling and Submerged Entry Nozzle Port Design on Slag Entrainment in a Slab Continuous‐Casting Mold. steel research international. 2026. doi:10.1002/srin.70587

BibTeX
@article{Zhang2026,
  author = {Zhang, Lianyou and Liu, Qin and Guan, Rui and Ai, Tianyu and Wang, Chao and Ai, Xingang and Li, Shengli},
  title = {Effect of Solidification Coupling and Submerged Entry Nozzle Port Design on Slag Entrainment in a Slab Continuous‐Casting Mold},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70587}
}
Kostenlos starten →