Achieving ultra-low surface roughness on aluminum alloys via picosecond laser milling–polishing
Journal of Applied Physics · 21.08.2026 · 140 (7)
DOI: 10.1063/5.0343077 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 19.08.2026. Verfasst von Kongliang Xie und 5 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Self-deployed Key Project of State Key Laboratory of Functional Crystals and Devices, Self-deploy Project of Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China.
Abstract (Originalsprache)
Producing high-quality milled surfaces on metals, particularly aluminum alloys, using laser-based techniques remains a considerable processing challenge, especially when ultra-low surface roughness is required. In this study, a novel laser milling–polishing (LMP) process employing a 1064 nm picosecond laser is proposed by integrating laser milling and laser polishing into a single processing strategy. Under optimized conditions with a laser fluence of 45.69 J/cm2 and 425 scanning passes, the surface roughness of the aluminum alloy is significantly reduced from 1.33 μm for the untreated surface to 90 nm after LMP treatment. Surface characterization indicates an increase in the oxygen content together with enhanced microhardness after laser treatment, indicating significant modification of the near-surface layer. Based on the observed evolution of the surface morphology, composition, and mechanical properties, a plausible mechanism for ultra-smooth surface formation is proposed. The results suggest that progressive reduction in effective energy density during multi-pass scanning induces a transition from ablation-dominated removal to shallow micro-melting and rapid resolidification, promoting material redistribution and surface leveling. The proposed LMP approach, therefore, provides an effective route toward high-precision laser finishing of aluminum alloys and other thermally sensitive metals.
Förderung
- National Natural Science Foundation of China
- Self-deployed Key Project of State Key Laboratory of Functional Crystals and Devices
- Self-deploy Project of Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China
Zitieren
APA
Xie, K., Huang, X., Zhang, Z., Cai, Z., Lin, W., & Liu, H. (2026). Achieving ultra-low surface roughness on aluminum alloys via picosecond laser milling–polishing. Journal of Applied Physics, 140(7). https://doi.org/10.1063/5.0343077
Vancouver
Xie K, Huang X, Zhang Z, Cai Z, Lin W, Liu H. Achieving ultra-low surface roughness on aluminum alloys via picosecond laser milling–polishing. Journal of Applied Physics. 2026;140(7). doi:10.1063/5.0343077
BibTeX
@article{Xie2026,
author = {Xie, Kongliang and Huang, Xin and Zhang, Zhiwang and Cai, Zhiming and Lin, Wenxiong and Liu, Huagang},
title = {Achieving ultra-low surface roughness on aluminum alloys via picosecond laser milling–polishing},
journal = {Journal of Applied Physics},
year = {2026},
volume = {140},
number = {7},
doi = {10.1063/5.0343077}
}
EUVIMED