EUVIMEDObjevte EUVIMED
Crossref

Effects of second-mode structural vibration on flow separation and hysteresis in supersonic compression corners

Yunhao Li, Kun Ye, Hong Wei, Liuqing Ye, Zhengyin Ye

Physics of Fluids · 2026-11-01 · 38 (11)

DOI: 10.1063/5.0341386 ↗

At a glance

Journal article in Physics of Fluids, published online on 2026-11-19. Written by Yunhao Li and 4 co-authors. 53 references. Funded by: National Key Research and Development Program of China, National Natural Science Foundation of China, Ministry of Education of the People's Republic of China.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Shock wave/boundary layer interaction (SBLI) at a compression corner is a canonical flow phenomenon in supersonic vehicles, and variations in wall geometry can significantly affect the associated shock system and near-wall flow. Extending the numerical study by Li et al. on the effects of prescribed first-mode panel vibration on supersonic compression-corner flow, the present work investigates the coherent aerodynamic response of the flow to prescribed second-mode-shaped panel motion with different amplitudes and frequencies. Two-dimensional unsteady Reynolds-averaged Navier–Stokes (URANS) simulations are performed using the Speziale–Sarkar–Gatski Reynolds-stress model together with a radial-basis-function mesh-deformation method. The prescribed second-mode-shaped motion produces adjacent concave and convex regions over the panel, resulting in spatially alternating compression and expansion effects. As the imposed amplitude increases, the initially separated flow develops into a separation bubble, accompanied by increasingly pronounced changes in the panel-induced wave system, wall pressure, and skin friction. When the downstream portion of the panel becomes concave, the separation bubble enlarges, and the compression-corner shock system moves markedly upstream. With increasing imposed frequency, the separation bubble in the downstream concave region gradually weakens and eventually vanishes. The wall-pressure–displacement phase trajectories exhibit closed loops, indicating a non-quasi-steady aerodynamic response, while the hysteresis associated with the separation-bubble evolution is less pronounced than that previously observed for the prescribed first-mode panel vibration investigated by Li et al. These results characterize the aerodynamic response of compression-corner SBLI to a controlled, spanwise-uniform second-mode-shaped variation in wall geometry. The conclusions are limited to the present prescribed-motion two-dimensional URANS framework and are not intended to represent the complete aeroelastic response of a finite-span panel.

Funding

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Ministry of Education of the People's Republic of China
  • National Key Laboratory of Aircraft Configuration Design

Cite

APA

Li, Y., Ye, K., Wei, H., Ye, L., & Ye, Z. (2026). Effects of second-mode structural vibration on flow separation and hysteresis in supersonic compression corners. Physics of Fluids, 38(11). https://doi.org/10.1063/5.0341386

Vancouver

Li Y, Ye K, Wei H, Ye L, Ye Z. Effects of second-mode structural vibration on flow separation and hysteresis in supersonic compression corners. Physics of Fluids. 2026;38(11). doi:10.1063/5.0341386

BibTeX
@article{Li2026,
  author = {Li, Yunhao and Ye, Kun and Wei, Hong and Ye, Liuqing and Ye, Zhengyin},
  title = {Effects of second-mode structural vibration on flow separation and hysteresis in supersonic compression corners},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {11},
  doi = {10.1063/5.0341386}
}
Start for free →