Effects of second-mode structural vibration on flow separation and hysteresis in supersonic compression corners
Physics of Fluids · 01.11.2026 · 38 (11)
DOI: 10.1063/5.0341386 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 19.11.2026. Verfasst von Yunhao Li und 4 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Ministry of Education of the People's Republic of China.
Abstract (Originalsprache)
Shock wave/boundary layer interaction (SBLI) at a compression corner is a canonical flow phenomenon in supersonic vehicles, and variations in wall geometry can significantly affect the associated shock system and near-wall flow. Extending the numerical study by Li et al. on the effects of prescribed first-mode panel vibration on supersonic compression-corner flow, the present work investigates the coherent aerodynamic response of the flow to prescribed second-mode-shaped panel motion with different amplitudes and frequencies. Two-dimensional unsteady Reynolds-averaged Navier–Stokes (URANS) simulations are performed using the Speziale–Sarkar–Gatski Reynolds-stress model together with a radial-basis-function mesh-deformation method. The prescribed second-mode-shaped motion produces adjacent concave and convex regions over the panel, resulting in spatially alternating compression and expansion effects. As the imposed amplitude increases, the initially separated flow develops into a separation bubble, accompanied by increasingly pronounced changes in the panel-induced wave system, wall pressure, and skin friction. When the downstream portion of the panel becomes concave, the separation bubble enlarges, and the compression-corner shock system moves markedly upstream. With increasing imposed frequency, the separation bubble in the downstream concave region gradually weakens and eventually vanishes. The wall-pressure–displacement phase trajectories exhibit closed loops, indicating a non-quasi-steady aerodynamic response, while the hysteresis associated with the separation-bubble evolution is less pronounced than that previously observed for the prescribed first-mode panel vibration investigated by Li et al. These results characterize the aerodynamic response of compression-corner SBLI to a controlled, spanwise-uniform second-mode-shaped variation in wall geometry. The conclusions are limited to the present prescribed-motion two-dimensional URANS framework and are not intended to represent the complete aeroelastic response of a finite-span panel.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Ministry of Education of the People's Republic of China
- National Key Laboratory of Aircraft Configuration Design
Zitieren
APA
Li, Y., Ye, K., Wei, H., Ye, L., & Ye, Z. (2026). Effects of second-mode structural vibration on flow separation and hysteresis in supersonic compression corners. Physics of Fluids, 38(11). https://doi.org/10.1063/5.0341386
Vancouver
Li Y, Ye K, Wei H, Ye L, Ye Z. Effects of second-mode structural vibration on flow separation and hysteresis in supersonic compression corners. Physics of Fluids. 2026;38(11). doi:10.1063/5.0341386
BibTeX
@article{Li2026,
author = {Li, Yunhao and Ye, Kun and Wei, Hong and Ye, Liuqing and Ye, Zhengyin},
title = {Effects of second-mode structural vibration on flow separation and hysteresis in supersonic compression corners},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {11},
doi = {10.1063/5.0341386}
}
EUVIMED