EUVIMEDEUVIMED entdecken
Crossref

Influence of back-blade structure on axial force and flow characteristics of a centrifugal pump

Lulu Zhai, Xiang Li, Jia Guo, Jintao Liu, Zuchao Zhu

Physics of Fluids · 01.11.2026 · 38 (11)

DOI: 10.1063/5.0341244 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 03.11.2026. Verfasst von Lulu Zhai und 4 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Research and Development Program of Zhejiang Province, china national machinery industry corporation technology project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Axial force critically affects the operational stability, bearing load and service life of centrifugal pumps, and back blades on the rear shroud are a widely adopted effective measure for axial-force mitigation. This work systematically explores the influences of curved back-blade configurations on pump hydraulic performance, axial-force variation, and internal flow structures via experiments coupled with steady and unsteady numerical simulations. One prototype impeller with balance holes and four curved back-blade impellers are tested under five flow conditions from 0.25Qd to 1.25Qd. The numerical method is validated against experimental data, with maximum relative errors of 3.25% for pump head and 8.51% for axial force. Eight newly designed impellers with varied back-blade counts and phase offsets are further simulated to analyze axial-force-flow characteristics. Curved back blades raise pump head but slightly reduce hydraulic efficiency. Notably, axial force presents a non-monotonic hump-shaped variation with flow rate, peaking at 0.75Qd for fully aligned back-blade impellers. The phase offset between main and back blades is identified as the dominant factor governing the hump. Aligned back blades intensify rotor–stator interaction, drive the primary vortex to precess toward the front-shroud clearance, amplify leakage, and induce a sharp front-shroud pressure drop, while phase-offset back blades suppress such interaction and eliminate the hump. These findings provide physical insight and practical guidance for back-blade optimization in centrifugal pump axial-force control.

Förderung

  • National Natural Science Foundation of China
  • Key Research and Development Program of Zhejiang Province
  • china national machinery industry corporation technology project
  • Zhejiang Key Laboratory of Multiflow and Fluid Machinery

Zitieren

APA

Zhai, L., Li, X., Guo, J., Liu, J., & Zhu, Z. (2026). Influence of back-blade structure on axial force and flow characteristics of a centrifugal pump. Physics of Fluids, 38(11). https://doi.org/10.1063/5.0341244

Vancouver

Zhai L, Li X, Guo J, Liu J, Zhu Z. Influence of back-blade structure on axial force and flow characteristics of a centrifugal pump. Physics of Fluids. 2026;38(11). doi:10.1063/5.0341244

BibTeX
@article{Zhai2026,
  author = {Zhai, Lulu and Li, Xiang and Guo, Jia and Liu, Jintao and Zhu, Zuchao},
  title = {Influence of back-blade structure on axial force and flow characteristics of a centrifugal pump},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {11},
  doi = {10.1063/5.0341244}
}
Kostenlos starten →