Pressure distribution characteristics in pump chamber and axial force optimization of reactor coolant pump
Physics of Fluids · 01.01.2025 · 37 (1)
DOI: 10.1063/5.0244654 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 07.01.2025. Verfasst von Huazheng Chen und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province.
Abstract (Originalsprache)
The aim of this study is to analyze the causes and mechanisms of axial force generation in the nuclear reactor coolant pump (RCP) through experimental and numerical simulation methods, so as to investigate the hydraulic design methods to reduce the axial force. The axial force of the RCP model and the pressure values at the monitoring points of the pump chamber were obtained through model experiments, and the flow visualization was constructed using numerical simulation methods. It is found that the outer-side force Fo has the greatest influence on the axial force, the essence of which is the pressure of the liquid in the front and rear pump chambers on the shroud and the hub of the impeller, and the size of the pressure increases with the increase in the radius, and is related to the impeller outlet pressure. By adjusting the combination of impeller exit angles, the impact on axial force was investigated. It was found that reducing the exit angle near the hub can significantly lower the fluid pressure in the rear pump chamber, thereby reducing the axial force acting on the impeller, while maintaining the hydraulic performance of the pump unchanged. The conclusions of this study can serve as a reference for improving the operational safety and service life of RCPs.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
Zitieren
APA
Chen, H., Liu, X., Li, H., Zhu, R., Fu, Q., & Lu, Y. (2025). Pressure distribution characteristics in pump chamber and axial force optimization of reactor coolant pump. Physics of Fluids, 37(1). https://doi.org/10.1063/5.0244654
Vancouver
Chen H, Liu X, Li H, Zhu R, Fu Q, Lu Y. Pressure distribution characteristics in pump chamber and axial force optimization of reactor coolant pump. Physics of Fluids. 2025;37(1). doi:10.1063/5.0244654
BibTeX
@article{Chen2025,
author = {Chen, Huazheng and Liu, Xiangsong and Li, Huairui and Zhu, Rongsheng and Fu, Qiang and Lu, Yonggang},
title = {Pressure distribution characteristics in pump chamber and axial force optimization of reactor coolant pump},
journal = {Physics of Fluids},
year = {2025},
volume = {37},
number = {1},
doi = {10.1063/5.0244654}
}
EUVIMED