Electrical and optical analysis on effects of low-temperature-grown p-AlGaAs cladding layer in all-MOCVD InAs/GaAs quantum dot laser diodes
Applied Physics Letters · 06.07.2026 · 129 (1)
DOI: 10.1063/5.0339959 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 09.07.2026. Verfasst von Seungchul Lee und 2 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Ministry of Education, Ministry of Science and ICT, South Korea, Electronics and Telecommunications Research Institute.
Abstract (Originalsprache)
In this work, we investigate how low-temperature growth of the p-AlGaAs cladding layer affects the structural and device characteristics of all-metal-organic chemical vapor deposition (MOCVD)-grown InAs/GaAs quantum dot laser diodes (QDLDs) operating in the O-band. While reduced-temperature p-AlGaAs growth is required to suppress degradation of the strained dots-in-a-well (DWELL) active region, its direct device-level impact has remained insufficiently clarified. Here, we show that, although dislocation-related morphology is shown in the p-AlGaAs cladding, the underlying DWELL active region remains largely preserved. Cross-sectional transmission electron microscopy and etch-dependent photoluminescence measurements further indicated that the structural non-uniformity was mainly confined to the upper cladding rather than associated with irreversible active-region degradation. Electrical current-component analysis showed that the bulk injection path was only weakly affected and that the surface-related current contribution was negligible. Based on these results, 1.5-mm-cavity shallow-ridge devices were fabricated and evaluated under continuous-wave operation. After high-reflectivity coating, the threshold current decreased from 125.5 to 65.5 mA and the slope efficiency increased from 0.084 to 0.128 W/A. The device also exhibited a lasing linewidth of 6.8 MHz and relatively low near-threshold relative intensity noise. These results show that low-temperature p-AlGaAs cladding growth can be used to realize all-MOCVD-grown InAs/GaAs QDLDs without imposing a severe electrical or optical degradation.
Förderung
- Ministry of Education
- Ministry of Science and ICT, South Korea
- Electronics and Telecommunications Research Institute
Zitieren
APA
Lee, S., Geum, D., & Kim, H. (2026). Electrical and optical analysis on effects of low-temperature-grown p-AlGaAs cladding layer in all-MOCVD InAs/GaAs quantum dot laser diodes. Applied Physics Letters, 129(1). https://doi.org/10.1063/5.0339959
Vancouver
Lee S, Geum D, Kim H. Electrical and optical analysis on effects of low-temperature-grown p-AlGaAs cladding layer in all-MOCVD InAs/GaAs quantum dot laser diodes. Applied Physics Letters. 2026;129(1). doi:10.1063/5.0339959
BibTeX
@article{Lee2026,
author = {Lee, Seungchul and Geum, Dae-Myeong and Kim, HoSung},
title = {Electrical and optical analysis on effects of low-temperature-grown p-AlGaAs cladding layer in all-MOCVD InAs/GaAs quantum dot laser diodes},
journal = {Applied Physics Letters},
year = {2026},
volume = {129},
number = {1},
doi = {10.1063/5.0339959}
}
EUVIMED