Effects of reflux-hole position on gas–liquid separation and self-priming performance in a vortex self-priming pump
Physics of Fluids · 01.07.2026 · 38 (7)
DOI: 10.1063/5.0337064 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 09.07.2026. Verfasst von Jingyu Cui und 6 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: Zhejiang Provinacial Natural Science Foundation of China, National Natural Science Foundation of China, Science Foundation of Zhejiang Sci-Tech University.
Abstract (Originalsprache)
This study investigates the influence of reflux-hole height on self-priming performance in a vortex self-priming pump. Three-dimensional transient simulations were performed using an Eulerian volume-of-fluid model, and Liutex-based vortex identification and local entropy production analysis were employed to reveal the coupling between vortex structures and irreversible energy loss. The baseline pump without a reflux hole serves as the reference case. Results show a distinctly non-monotonic effect of reflux-hole height: a low-position hole (58 mm) increases the inlet gas mass flow rate by 41% relative to baseline and reduces the self-priming time from 2.35 to 1.65 min, whereas intermediate heights (88–99 mm) degrade performance due to back-pressure accumulation, liquid-ring discontinuity, and blockage vortices. The optimal high-position hole (114 mm) achieves a 62% increase in gas mass flow and shortens self-priming time to 1.45 min. Entropy production analysis indicates that turbulent dissipation dominates energy loss, with severe irreversible loss arising mainly from shear-dominated deformation around vortex boundaries rather than rigid-body rotation. Within the tested pump geometry and operating conditions, intermediate reflux-hole heights should be avoided, while a high-position reflux hole near the gas-discharge side maximizes gas evacuation and minimizes nonproductive energy dissipation.
Förderung
- Zhejiang Provinacial Natural Science Foundation of China
- National Natural Science Foundation of China
- Science Foundation of Zhejiang Sci-Tech University
Zitieren
APA
Cui, J., Luo, Q., Feng, L., Jin, Y., Lin, R., Lin, R., & Zhu, Z. (2026). Effects of reflux-hole position on gas–liquid separation and self-priming performance in a vortex self-priming pump. Physics of Fluids, 38(7). https://doi.org/10.1063/5.0337064
Vancouver
Cui J, Luo Q, Feng L, Jin Y, Lin R, Lin R, et al. Effects of reflux-hole position on gas–liquid separation and self-priming performance in a vortex self-priming pump. Physics of Fluids. 2026;38(7). doi:10.1063/5.0337064
BibTeX
@article{Cui2026,
author = {Cui, Jingyu and Luo, Qianyi and Feng, Linhao and Jin, Yuzhen and Lin, Renyong and Lin, Rong and Zhu, Zuchao},
title = {Effects of reflux-hole position on gas–liquid separation and self-priming performance in a vortex self-priming pump},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {7},
doi = {10.1063/5.0337064}
}
EUVIMED