EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Temporal shaping of nanosecond diamond Raman laser via pump manipulation

Yanzhao Ke, Wenwen Cheng, Junhong He, Junrui Liang, Jun Ye, Yue Tao, Can Li, Jiangming Xu, Jinyong Leng, Lei Si, Pu Zhou

Harmonics and Scattering · 2026

DOI: 10.1063/5.0327503 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Harmonics and Scattering, 2026. Verfasst von Yanzhao Ke und 10 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Postgraduate Scientific Research Innovation Project of Hunan Province, Innovation Research Foundation of National University of Defense Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanosecond diamond Raman lasers (DRLs) have significant potential for lidar and remote sensing, yet precise control of the Stokes waveform remains challenging. Here, we systematically investigate the temporal shaping dynamics of a 1240-nm external-cavity DRL pumped by a flexibly tunable pulsed 1064-nm fiber laser. The pump source provides pulse durations from 15 to 200 ns at a 100-kHz repetition rate, enabling independent control of peak power and pulse energy to characterize the dynamics of Stokes buildup, rise, and decay. The DRL system achieved a maximum average Stokes power of 3.87 W with a slope efficiency of 52%. At a fixed pump width of 200 ns, increasing the peak power reduced the oscillation buildup time from 182 to 73 ns. Under a constant pulse energy of ∼100 μJ, shortening the pump pulse duration greatly increased the Raman gain, reducing the buildup time from 171 to 15 ns and the rise time from 46 to 22 ns. Coupled-wave model analysis indicates that reducing the cavity length and optimizing output coupling improve energy conversion efficiency and increase the Stokes peak power. The model further shows that typical Stokes pulse profiles—exponential-decay, Gaussian, triangular, and flat-top waveforms—can be generated through joint design of the pump waveform and cavity parameters. These results provide a practical framework for producing nanosecond DRLs with application-specific temporal profiles.

Förderung

  • National Natural Science Foundation of China
  • Postgraduate Scientific Research Innovation Project of Hunan Province
  • Innovation Research Foundation of National University of Defense Technology

Zitieren

APA

Ke, Y., Cheng, W., He, J., Liang, J., Ye, J., Tao, Y., Li, C., Xu, J., Leng, J., Si, L., & Zhou, P. (2026). Temporal shaping of nanosecond diamond Raman laser via pump manipulation. Harmonics and Scattering. https://doi.org/10.1063/5.0327503

Vancouver

Ke Y, Cheng W, He J, Liang J, Ye J, Tao Y, et al. Temporal shaping of nanosecond diamond Raman laser via pump manipulation. Harmonics and Scattering. 2026. doi:10.1063/5.0327503

BibTeX
@article{Ke2026,
  author = {Ke, Yanzhao and Cheng, Wenwen and He, Junhong and Liang, Junrui and Ye, Jun and Tao, Yue and Li, Can and Xu, Jiangming and Leng, Jinyong and Si, Lei and Zhou, Pu},
  title = {Temporal shaping of nanosecond diamond Raman laser via pump manipulation},
  journal = {Harmonics and Scattering},
  year = {2026},
  doi = {10.1063/5.0327503}
}
Kostenlos starten →