EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Method of reactive power compensation for medium voltage feeder voltage fluctuations considering random output superposition of source load timing characteristics

Jun Lai, Xinwei Wang, Yujia Xi, Shenwei Chen, Yang Zhao

AIP Advances · 01.05.2026 · 16 (5)

DOI: 10.1063/5.0313976 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 29.05.2026. Verfasst von Jun Lai und 4 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Development of Intelligent Reactive Power and Voltage Control Function Based on Edge Computing in Distribution Networks.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to address the impact of timing and volatility on the dynamic characteristics of medium voltage (MV) feeders following the grid connection of numerous distributed power sources, as well as the phenomenon of voltage overruns caused by the superposition of random outputs, this paper proposes a reactive power compensation method for MV feeder voltage fluctuation, considering the superposition of random outputs based on the sequential characteristics of sources and loads. The method combines the time-sequence processing characteristics of “source” and “load,” analyzes the effects of their superposition, and then uses the reactive power compensation devices for the MV feeder reactive power compensation to regulate the current voltage of the MV feeder. The optimization model is constructed based on the reactive power compensation device, the transient voltage stability margin and threshold difference are maximized, the loss is minimized, and the reactive power cost is minimized as the optimization objective function, as well as the capacity and number of reactive power devices and other constraints. The optimization model is solved by using the improved particle swarm algorithm to obtain the best optimization results of voltage fluctuation suppression. The results show that the method can reliably analyze the actual processing superposition state of the source–load time-sequence characteristics, the fluctuation range of the voltage after compensation optimization is located between 0.95 and 1.05 p.u., and the fluctuation amplitude is relatively smooth. The results of the voltage stability margins are above 0.10, which can ensure the voltage stability and avoid the occurrence of the voltage overrun.

Förderung

  • Development of Intelligent Reactive Power and Voltage Control Function Based on Edge Computing in Distribution Networks

Zitieren

APA

Lai, J., Wang, X., Xi, Y., Chen, S., & Zhao, Y. (2026). Method of reactive power compensation for medium voltage feeder voltage fluctuations considering random output superposition of source load timing characteristics. AIP Advances, 16(5). https://doi.org/10.1063/5.0313976

Vancouver

Lai J, Wang X, Xi Y, Chen S, Zhao Y. Method of reactive power compensation for medium voltage feeder voltage fluctuations considering random output superposition of source load timing characteristics. AIP Advances. 2026;16(5). doi:10.1063/5.0313976

BibTeX
@article{Lai2026,
  author = {Lai, Jun and Wang, Xinwei and Xi, Yujia and Chen, Shenwei and Zhao, Yang},
  title = {Method of reactive power compensation for medium voltage feeder voltage fluctuations considering random output superposition of source load timing characteristics},
  journal = {AIP Advances},
  year = {2026},
  volume = {16},
  number = {5},
  doi = {10.1063/5.0313976}
}
Kostenlos starten →