Design of Compensation Topology for IPT System Considering Coils’ Parameters and Load Variations for CC or CV Output
IEEE Transactions on Transportation Electrification · 2024-03 · 10 (1) · 1583-1595
DOI: 10.1109/tte.2023.3272919 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2024-03. Verfasst von Yuanfang Lu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 28 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Sichuan Science and Technology Program.
Abstract (Originalsprache)
The inductive power transfer (IPT) technology is drawing increasing attention. Variations in the height of the secondary coil are inevitable due to the fluctuations in the height of the electrical equipment or the pressure of the tires, which leads to variations in the coils’ parameters (self-inductances and mutual inductance). The coils’ parameters and load variations can dramatically affect the performance of the IPT system. In this article, a unified mathematical model, which can describe multiple compensation topologies, is established. A design method is proposed to obtain suitable topology and component parameters based on the unified mathematical model and the nondominated sorting genetic algorithm II (NSGA-II). In addition, not only the stable output voltage/current is achieved, but the efficiency and cost are also improved. Finally, two experimental prototypes were built to verify the effectiveness, which has the output characteristics of constant current (CC) (3.5 A/600 W) and constant voltage (CV) (72 V/100 W). The results show that the output fluctuations are less than 5.63%, and the maximum efficiency is above 94.69% when the coils’ parameters (the primary self-inductance changes from 85.76 to $102.2 \mu \text{H}$ , the secondary self-inductance changes from 86.26 to $102.35 \mu \text{H}$ , and the mutual inductance changes from 38.2 to $72.1 \mu \text{H}$ ) and load (double change) vary.
Förderung
- National Natural Science Foundation of China
- Sichuan Science and Technology Program
Zitieren
APA
Lu, Y., Yang, B., He, S., Peng, Y., Lyu, T., Mai, R., & Chen, Y. (2024). Design of Compensation Topology for IPT System Considering Coils’ Parameters and Load Variations for CC or CV Output. IEEE Transactions on Transportation Electrification, 10(1), 1583-1595. https://doi.org/10.1109/tte.2023.3272919
Vancouver
Lu Y, Yang B, He S, Peng Y, Lyu T, Mai R, et al. Design of Compensation Topology for IPT System Considering Coils’ Parameters and Load Variations for CC or CV Output. IEEE Transactions on Transportation Electrification. 2024;10(1):1583-1595. doi:10.1109/tte.2023.3272919
BibTeX
@article{Lu2024,
author = {Lu, Yuanfang and Yang, Bin and He, Shuangjiang and Peng, Yuner and Lyu, Tianqi and Mai, Ruikun and Chen, Yang},
title = {Design of Compensation Topology for IPT System Considering Coils’ Parameters and Load Variations for CC or CV Output},
journal = {IEEE Transactions on Transportation Electrification},
year = {2024},
volume = {10},
number = {1},
pages = {1583--1595},
doi = {10.1109/tte.2023.3272919}
}
EUVIMED