EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Opto-electronically tuned CuO/ZnO ion sensitive heterojunction device for consumable water quality monitoring

Anushka Bhattacharya, Tanmoy Jana, Sukanya Mahalik, Arijit Pattra, Sandip Bhattacharya, Sayan Dey

APL Electronic Devices · 01.03.2026 · 2 (1)

DOI: 10.1063/5.0300089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift APL Electronic Devices, online erschienen am 18.03.2026. Verfasst von Anushka Bhattacharya und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Engineering Research Board.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rapid industrialization had led to increase in water pollution due to the discharge of toxic waste directly into the water bodies without proper treatment leading to increase in the concentration of heavy metal ions (HMIs) in the consumable water. The current study illustrates an opto-electronically tunable CuO/ZnO heterojunction based device for the detection of HMIs in water at a high selective rate. The device showed a response of 160% toward As(V) ions in the presence of UV light and 47% toward Ni(II) ions in the presence of red light for 100 ppm of the ions in the cutoff region and a response of 30% for UV light toward Hg(II) and 22% for red light toward As(III) ions for 100 ppm in the linear region. The device also demonstrated a response time of 5 and 3 s for As(V) and Hg(II) under UV light, respectively, and 10 and 19 s for Ni(II) and As(III) in the presence of red light, respectively. The device demonstrated excellent repeatability with a maximum error of approximately ±1.9%. The device also showed high response toward UV exposure compared to red light. The device’s high sensitivity toward different ions under various optical conditions demonstrated the optical tunability of the sensor toward different HMIs, thereby making it a suitable candidate over its existing hardware intensive counterparts. An adsorption based mechanism illuminated the device’s behavior toward different HMIs. Hence, this type of sensors can be used as an alternative route for the development of cost-efficient and industry-friendly HMI sensors.

Förderung

  • Science and Engineering Research Board

Zitieren

APA

Bhattacharya, A., Jana, T., Mahalik, S., Pattra, A., Bhattacharya, S., & Dey, S. (2026). Opto-electronically tuned CuO/ZnO ion sensitive heterojunction device for consumable water quality monitoring. APL Electronic Devices, 2(1). https://doi.org/10.1063/5.0300089

Vancouver

Bhattacharya A, Jana T, Mahalik S, Pattra A, Bhattacharya S, Dey S. Opto-electronically tuned CuO/ZnO ion sensitive heterojunction device for consumable water quality monitoring. APL Electronic Devices. 2026;2(1). doi:10.1063/5.0300089

BibTeX
@article{Bhattacharya2026,
  author = {Bhattacharya, Anushka and Jana, Tanmoy and Mahalik, Sukanya and Pattra, Arijit and Bhattacharya, Sandip and Dey, Sayan},
  title = {Opto-electronically tuned CuO/ZnO ion sensitive heterojunction device for consumable water quality monitoring},
  journal = {APL Electronic Devices},
  year = {2026},
  volume = {2},
  number = {1},
  doi = {10.1063/5.0300089}
}
Kostenlos starten →