EUVIMEDEUVIMED entdecken
Crossref

A differential inductive linear displacement sensor against common-mode interference

Jiayi Chen iD, Wei Xiong, Yuan Tan iD, Ziran Chen iD, Liang Wu iD

Review of Scientific Instruments · 01.03.2026 · 97 (3)

DOI: 10.1063/5.0293728 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 04.03.2026. Verfasst von Jiayi Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Engineering Research Center of Mechanical Testing Technology Equipment, Chongqing University of Technology, Chongqing 400054, China. Die Arbeit nennt 25 Literaturangaben. Gefördert von: The Science and Technology Research Program of Chongqing Municipal Education Commission, Chongqing University of Technology Postgraduate Research Innovation Project, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inductive displacement sensors offer robust interference resistance for harsh environments at the expense of reduced accuracy. This paper proposes an inductive sensor with a differential structure, which achieves precise displacement measurement through the eddy current effect between a planar coil and a metallic reflective conductor. The sensor incorporates a differential configuration, featuring two induction coils wound in opposite directions and connected in series, which effectively mitigates environmental common-mode interference. The sensor geometry was optimized through finite element simulation, employing a spatial phase shift of 1/6 cycle to eliminate third-harmonic distortion in the induced electromotive force. Experimental results indicate that the sensor achieves a resolution of 1 μm over a measurement range of 200 mm. To mitigate practical issues arising from installation errors, such as unequal signal amplitudes and non-orthogonal phase shifts, amplitude compensation and DC offset correction algorithms were applied. These measures substantially reduced the peak-to-peak error from 70 to 21 μm, resulting in a nonlinearity error of 0.014%. Because of the simple structure, cost-effectiveness, and proven reliability, the sensor is suitable for widespread industrial applications.

Autor:innen und Institutionen

  • Engineering Research Center of Mechanical Testing Technology Equipment, Chongqing University of Technology, Chongqing 400054, China.
  • Beijing Institute of Precise Mechanical and Electronic Control Equipment, Beijing 100076, China.

ORCID-Profile: Jiayi Chen, Yuan Tan, Ziran Chen, Liang Wu

Förderung

  • The Science and Technology Research Program of Chongqing Municipal Education Commission
  • Chongqing University of Technology Postgraduate Research Innovation Project
  • National Natural Science Foundation of China

Zitieren

APA

Chen, J., Xiong, W., Tan, Y., Chen, Z., & Wu, L. (2026). A differential inductive linear displacement sensor against common-mode interference. Review of Scientific Instruments, 97(3). https://doi.org/10.1063/5.0293728

Vancouver

Chen J, Xiong W, Tan Y, Chen Z, Wu L. A differential inductive linear displacement sensor against common-mode interference. Review of Scientific Instruments. 2026;97(3). doi:10.1063/5.0293728

BibTeX
@article{Chen2026,
  author = {Chen, Jiayi and Xiong, Wei and Tan, Yuan and Chen, Ziran and Wu, Liang},
  title = {A differential inductive linear displacement sensor against common-mode interference},
  journal = {Review of Scientific Instruments},
  year = {2026},
  volume = {97},
  number = {3},
  doi = {10.1063/5.0293728}
}
Kostenlos starten →